Idiomas disponibles
Idiomas disponibles
11. Install an AA battery (20) into the
control box, then fix the control box (2)
underneath the middle plate (1) using
screws (17);
7. Fix the reflector (10) onto the damper
(9) using screws (17);
12. Carefully put the glass tube (8) up
through the centre hole in the upper
plate (6), make sure the rubber ring is
attached on the lower end of the glass
tube (8). Move and sit the glass tube (8)
through the hole of the plate cover (7)
on the middle plate (1), check and
ensure that the glass tube (8) cover the
centre hole of the middle plate (1);
8. Attach the protection guards (11) onto the
frame by putting the hooks into the holes
of the frame. Fix the guards by the fixing
brackets (14);
44
