Idiomas disponibles
Idiomas disponibles
NOTE
• In an environment near to the beach, corrosion occurs more quickly than normal.
• Frequently check for corroded areas and repair them promptly.
• Wait until heater is cool before covering.
CLEANING AND MAINTENANCE
• To ensure outstanding performance of your heater make sure to perform the
following maintenance activities on a regular basis:
-
Keep exterior surfaces clean.
-
Use warm soapy water for cleaning. Never use flammable, corrosive or abrasive
cleaners.
-
While washing your unit, be sure to keep the area around the burner and pilot
assembly dry at all time. If the gas control is exposed to water in any way, do
NOT use it. It must be replaced.
• Before use the unit should be inspected for spiders, spider webs or other insects.
• Air flow must be unobstructed. Keep controls. Burner and circulating air
passageways clean.
• Signs of possible blockage include:
-
Gas odor with extreme yellow tipping of flame.
-
Heater does NOT reach the desired temperature.
-
Heater glow is excessively uneven.
-
Heater makes popping noises.
• Compressed air may help clear away smaller particles.
• Carbon deposits can create a fire hazard. Clean reflector and glass tube inside with
soapy water if any carbon deposits develop. Always be careful when cleaning the
glass tube.
39
