Idiomas disponibles
Idiomas disponibles
Hose installation
1. Place the metal clamp on the hose end.
2. Connect the hose to the oven inlet and tighten the
clamp.
3. Place the other clamp on the oppsite hose end and
connect it to the pressure regulator, tighten the clamp.
4. Bolt the pressure regulator to the gas cylinder carefully.
5. After the installation, check if there is any gas leak, using
soap or liquid detergent foam.
6. In order to combat chain first blow a hole in the wall.
Put the plastic cap on it and screw the chain end.
Always check for the validity of the pressure regulator.
Hose and regulator should be replaced every 5 years
or when it is broken.
Watch out for food and kitchen utensils
1. To manage or eliminate foods, please use the oven
mitts.
2. Do not leave clothing or flammable materials near the
burner when the stove is in use. When using oil or butter for
frying extra care should be taken, as these products are
flammable.
3. Do not use the oven for storing utensils, especially those
containing large amounts of waste or oil and grease.
4. Container with base curves or projecting edges should
not be used because they can easily be destabilized when
moving.
5. The handle of the utensil to be positioned so that it
becomes inward
English-8
