Oster OS-PGSGMICA24HSSGRM Manual De Instrucciones página 29

Idiomas disponibles

Idiomas disponibles

INSTALLING THE GAS COOKER
To prevent the cooker from tipping forward, two lengths of
chain MUST BE fixed to the back of the cooker, which
should be secured to the hooks provided at all times.
The hooks should be secured to the wall at the rear of the
cooker. The chains should always be attached to the hooks
when the cooker is in position against the wall. Fix the
hooks into the wall immediately behind the cooker on both
sides. Secure the chain to the hook before using or
Chain
cleaning the oven
Ru
cu
Gas installation
1. This range was designed for use with LPG & NG gas.
2. Always use a pressure regulator exclusive for your gas
range.
The lack of pressure regulator might cause excess of
pressure and leak of gas.
Always check for the validity of the pressure regulator.
Hose and regulartor
should be replaced every 5 years. Technical specificaltion
of the pressure regulator.
• Pressure: LPG 27.5mbar; NG 20mbar
• Max. consumption: 2kg/h
3. Always use a PVC hose to work from-20O C to 100O C.
Be sure that hose:
• does not have joints.
• does not go on the back of the gas range neither close to
the hot air exits.
• Its less then 125cm long.
4. If possible, install the gas cylinder outside the kitchen, in
a place protected and with air flow.
5. Use a ½ metallice hose to connect to the gas range.
6. Only use a plastic hose when this one does not go on the
back of the gas range.
English-7
loading