Idiomas disponibles
Idiomas disponibles
FL420 Electronic Locking User Guide — General Operating Instructions
- ''OPERATOR ID WAS ASSIGNED'' should display on screen.
- Press OK to continue.
- Press ''SIGN OUT'' to exit Supervisor Mode.
Add New Controlled Substance Code:
Note: Only for carts that are equipped with a Controlled Substance
drawer. The factory default code is 7777 with 1234 as the PIN. Both must
be changed before narcotics are placed in the drawer.
- Press OK to wake up touch pad.
- Enter Supervisor Code & Press OK.
- Press ''FUNCTION'' key several times until ''ASSIGN A NEW CS CODE''
is displayed & Press OK.
- Enter New 4-digit CS Code & Press OK.
- Enter PIN number to coincide with new CS Code or Press OK to skip.
- Press OK to accept new CS Code / PIN number or ''CLEAR'' to change.
- Enter CS Name or Press OK to skip.
- Press OK to accept User name or ''CLEAR'' to change.
- ''THE CS CODE WAS ASSIGNED'' should display on screen.
- Press OK to continue.
- Press ''SIGN OUT'' to exit Supervisor Mode.
Delete Existing Controlled Substance Code:
Note: Only the 4-digit CS Code has to be entered to delete the user; if
User added PIN, it is not necessary for Supervisor to know the PIN to
Delete the User.
- Press OK to wake up touch pad.
- Enter Supervisor Code.
- Press ''FUNCTION'' key several times until ''DELETE CS CODE'' is
displayed & Press OK.
- Enter 4-digit CS Code to be deleted & Press OK.
- Press OK again to delete CS Code.
- Press ''SIGN OUT'' to exit Supervisor Mode.
Edit Existing Controlled Substance Code:
Note: Cannot change CS Code itself but can edit information tied to CS
Code (i.e., PIN, Name); to change CS Code, must Delete existing code &
Add new code.
- Press OK key to wake up touch pad.
- Enter CS Code & Press OK.
- Press ''FUNCTION'' key several times until ''EDIT CS CODE'' is
displayed & Press OK.
- Enter the CS Code to be edited.
- Press OK to change the User PIN or Press ''SELECT'' to skip.
- Press OK to change the current CS Name or Press ''SELECT'' to skip.
- The CS ID was updated will display on screen.
- Press OK to continue.
- Press ''SIGN OUT'' to exit Supervisor Mode.
Set Auto Lock Timer - Cart:
The cart includes an adjustable time-out period controlled by a motion
sensor. While motion is sensed the time out is inactive. When no motion
is sensed the time-out countdown begins. Several seconds before the
time-out period elapses, an audible tone will sound 5 times then the cart
will automatically relock. Any motion (or pressing any key) before the fi fth
tone will reset the time-out period. The factory time-out default setting is 5
minutes.
Note: The cart time-out can be set in seconds (10 to 99) or minutes (1 to
999). To set time in seconds, enter a leading ''0'' in front of the number
(e.g. 015 = 15 seconds). To set time in minutes, do not enter a leading ''0''
(e.g. 15 = 15 minutes).
- Press OK key to wake up touch pad.
- Enter Supervisor Code and press OK.
- Press the ''FUNCTION'' key several times until ''SET THE CART TIME
OUT'' displays.
- Press OK. The current time-out setting will display.
- Press OK to change the setting.
- Enter a new time-out (for seconds, use a leading ''0'').
- Press OK.
- Press the ''SIGN OUT'' key exit Supervisor Mode.
Set Auto Lock Timer - CS Drawer:
Note: Only for carts that are equipped with a Controlled Substance
drawer.
The CS drawer has a separate adjustable time-out that begins when the
drawer is unlocked but not pulled open. The time-out is disabled when any
keyless drawer is pulled out. The countdown resets again as soon as all
keyless drawers are closed. If drawers are closed, several seconds before
the time-out period elapses, fi ve long audible tones will sound before the
drawers relock. A message will display indicating that the CS drawer is
unlocked. Relock the drawer by pressing the CS key.
Note: The CS drawer time-out is set in seconds, 10-999. It is not
necessary to add a leading ''0'' in front of the number (e.g. 15 = 15
seconds).
- Press OK key to wake up touch pad.
- Enter Supervisor Code and press OK.
- Press the ''FUNCTION'' key several times until ''SET THE CS TIME OUT''
displays.
- Press OK. The current time-out setting will display.
- Press OK to change the setting.
- Enter a new time-out in seconds (10-999).
- Press OK.
- Press the ''SIGN OUT'' exit Supervisor Mode.
Set Cart Date and Time:
Note: The date is set as MM/DD/YY and will automatically change at the
beginning of each new calendar year and will add an extra day for leap
years. Time can be entered as standard or military.
Set Cart Date:
- Press OK to wake up touch pad.
- Enter Supervisor Code and press OK.
- Press ''FUNCTION'' key several times until ''SET THE CART DATE'' is
displayed.
- Press OK.
- The current date will display.
- Press OK to change the date.
- Enter a new date (MM/DD/YY).
- Press OK to accept or ''CLEAR'' to change.
- Press ''SIGN OUT'' to exit Supervisor Mode.
Set Cart Time:
- Press OK to wake up touch pad.
- Enter Supervisor Code and press OK.
- Press ''FUNCTION'' key several times until ''SET THE CART TIME'' is
displayed.
- Press OK.
- The current time will display.
- Press OK to change the time.
- Choose either ''STANDARD TIME PRESS 1'' or ''MILITARY TIME PRESS
9'' Press OK.
- Enter the new time.
- Press OK to accept or ''CLEAR'' to change.
- Press ''SIGN OUT'' to exit Supervisor Mode.
Section 7: User Code Functions
Edit Existing User Code:
Note: Cannot change User Code itself but can edit information tied to
User Code (e.g., PIN).
- Press OK key to wake up touch pad.
- Enter User Code and press OK.
- Press ''FUNCTION'' key several times until ''CHANGE THE OPERATOR
PIN'' is displayed.
- Enter current PIN or Press OK if there is no current PIN.
- Enter New PIN or Press OK to skip.
- Press OK to accept new PIN or ''CLEAR'' to change PIN.
- Press ''SIGN OUT'' to exit & lock cart.
Continued...
