Metro Flexline FL420 Guia Del Usuario página 2

FL420 Electronic Locking User Guide — General Operating Instructions
Change Service Code:
- Press OK to wake up touch pad.
- Enter Set Up Code & Press OK.
- Press ''FUNCTION'' key several times until ''SET NEW SERVICE ID'' is
displayed & Press OK.
- Enter New 3-digit Service Code & Press OK.
- Enter PIN number to coincide with new Service Code or Press OK to
skip.
- Press OK to accept new Service Code / PIN number.
- Enter Service Name or Press OK to skip.
- Press OK to accept Service name.
- Press ''SIGN OUT'' to exit Set Up Mode.
Setting the Cart ID:
- Press OK to wake up touch pad.
- Enter Set Up Code & Press OK.
- Press ''FUNCTION'' key several times until ''SET THE CART ID'' is
displayed & Press OK.
- Current ID will display on screen.
- Press OK to change current ID or ''SELECT'' to skip.
- Enter new Cart ID (must be 2 to 4 digits) & Press OK.
- Press OK to accept new Cart ID.
- Current Cart Name will display on screen.
- Press OK to change Cart Name or ''SELECT'' to skip.
- Enter new Cart Name & Press OK.
- Press OK to accept new Cart Name, to change press ''CLEAR''.
- Press ''SIGN OUT'' to exit Set Up Mode.
Add New Supervisor Code:
- Press OK to wake up touch pad.
- Enter Set Up Code & Press OK.
- Press ''FUNCTION'' key several times until ''ASSIGN A NEW MANAGER
ID'' is displayed & Press OK.
- Enter New 4-digit Supervisor Code & Press OK.
- Enter PIN number to coincide with new Supervisor Code or Press OK to
skip.
- Press OK to accept new Supervisor Code / PIN number or ''CLEAR'' to
change.
- Enter Supervisor Name or Press OK to skip.
- Press OK to accept Supervisor name.
- Press ''SIGN OUT'' to exit Set Up Mode.
Delete Existing Supervisor Code:
- Press OK key to wake up touch pad.
- Enter Set Up Code & Press OK.
- Press ''FUNCTION'' key several times until ''DELETE A MANAGER ID'' is
displayed & Press OK.
- Enter Supervisor Code to be deleted & Press OK or ''CLEAR'' to
change.
- Press OK again.
- Press ''SIGN OUT'' to exit Set Up Mode.
Edit Existing Supervisor Code:
Note: Cannot change Supervisor Code itself but can Edit information tied
to Supervisor Code (i.e., PIN & Name).
- Press OK to wake up touch pad.
- Enter Set Up Code & Press OK.
- Press ''FUNCTION'' key several times until ''EDIT A MANAGER ID'' is
displayed & Press OK.
- Enter Supervisor Code to be edited & Press OK.
- Press OK to Add/Change PIN number to coincide with Supervisor Code
or Press ''SELECT'' to skip.
- Press OK to Add/Change Supervisor Name to coincide with Supervisor
Code or Press ''SELECT'' to skip.
- Press OK to accept Supervisor name.
- Press ''SIGN OUT'' to exit Set Up Mode.
Section 6: Supervisor Code Functions
Edit Existing Supervisor Code:
Note: Cannot change Supervisor Code itself but can Edit information tied
to Supervisor Code (i.e., PIN).
- Press OK to wake up touch pad.
- Enter Supervisor Code & Press OK.
- Press ''FUNCTION'' key several times until ''CHANGE THE MANAGER
PIN'' is displayed & Press OK.
- Enter current PIN or Press OK if there is no current PIN.
- Enter New PIN or Press OK to skip.
- Press OK to accept new PIN or press ''CLEAR'' to change.
- Press ''SIGN OUT'' to exit Supervisor Mode.
Add New User Code:
- Press OK to wake up touch pad.
- Enter Supervisor Code & Press OK.
- Press ''FUNCTION'' key several times until ''ASSIGN A NEW OPERATOR
ID'' is displayed & Press OK.
- Enter New 4-digit User Code & Press OK.
- Enter PIN number to coincide with new User Code then re-enter the PIN
OR press OK to skip.
- Enter User Name or Press OK to skip.
- Press OK to accept User name.
- ''THE OPERATOR WAS ASSIGNED'' should display on screen.
- Press OK to continue.
- Press ''SIGN OUT'' to exit Supervisor Mode.
Delete Existing User Code:
Note: Only the 4-digit User Code has to be entered to delete the user;
If User added PIN, it is not necessary for Supervisor to know the PIN to
Delete the User.
- Press OK to wake up touch pad.
- Enter Supervisor Code.
- Press ''FUNCTION'' key several times until ''DELETE AN OPERATOR ID''
is displayed & Press OK.
- Enter 4-digit User Code to be deleted & Press OK.
- Press OK again to delete User Code.
- Press ''SIGN OUT'' to exit Supervisor Mode.
Edit Existing User Code:
Note: Cannot change User Code itself but can edit information tied to
User Code (i.e., PIN, Name, Card). To change User Code, must Delete
existing code & Add new code.
- Press OK key to wake up touch pad.
- Enter Supervisor Code & Press OK.
- Press ''FUNCTION'' key several times until ''EDIT AN OPERATOR ID'' is
displayed & Press OK.
- Enter the User Code to be edited.
- Press OK to change the User PIN or Press ''SELECT'' to skip.
- Press OK to change the current User Name or Press ''SELECT'' to skip.
- The Operator ID was updated will display on screen.
- Press OK to continue.
- Press ''SIGN OUT'' to exit Supervisor Mode.
Add New User Card:
Note: Only for a cart that is equipped with a card reader; this function can
be performed by the Supervisor or User.
- Press OK to wake up touch pad.
- Enter Supervisor Code & Press OK.
- Press ''FUNCTION'' key several times until ''ASSIGN A NEW OPERATOR
ID'' is displayed & Press OK.
- Enter New 4-digit User Code & Press OK.
- Card ID: OK = no change; 0 = none or swipe card.
- Enter PIN number to coincide with new User Code or Press OK to skip.
- Press OK to accept new User Code / PIN number.
- Enter User Name or Press OK to skip.
- Press OK to accept User name.
Continued...