Conformity Declaration - Oscartielle ARGUS Instrucciones De Uso

- Price holders in aluminium or
- Electric defrosting (armoured resistances on the evaporator).
If yo u are interested in purchasing any of the above accessories, contact your nearest dealer or the manufacturer direct
Onl y qualified personnel should assembl
14 - Customer service
If y ou need the assistance of expert service personnel, or if any mechanical, electrical or compressor components ne
to b e replaced, please contact the dealer from whom you boug
15 - Dismantling and elimination of cabinet
environmental reasons and in compliance with the regulations in your country, separate the parts of the cabinet
For
disp osal and/or re cycling.
All the parts that make up the cabinet are made of materials that are not classifiable as urban waste except for the
me tallic parts that are not classified as special waste in most countries. As regards the parts of the refrigeration
that is the refrigerating gas and lubricating oil, these should not be dispo
specialized cen ters.
This produc t contains
(GWP) regul ated by the K
The gas co ntained in foam
Oscartielle eq uips its plug-i
R 134a; GW P = 1300
(100)
R 404A; GW P = 3750
(100)
This unit is h ermetically se
For this rea son it is not s
the refrigera ting gas (pre
16 - Manufa cturer's decl
The above m odels are al
by EEC Directiv e 89/392
machine in which it is in
EEC Directive 89/392 and applicable national laws has been ascertained, in other words, until
this statement becomes one with the final machine.
17 – Multiple xing instruc
In order to multiplex two or more c
- Draw the cabinets cl
- Insert two iro n prongs
- Hook th e basemen
cabinet.
- Remove the back pa
- Join the ba sins screwi
4b) us ing 4 screws M8x60
- In the end assemble
- Join the d oor framew
18- Diagram for cables a
Diagram for cables and pi
19 - Wiring d iagrams
agrams can b
The wiring di
mity Declara
20 - Confor
A copy of the decl aration
http://www.o scartielle.it/
plastic.
e the electric defrosting units.
HFC, namely fluoridated gasses, a refrigerating gas with a high Global Warming Potential
yoto pr otocol.
polystyr ene for thermal in
n cabinets with the following types of refrigerating gasses:
aled and the refrigerating g
ubject to the requisite of an installation booklet and periodic inspections for leakage of
sidential Decree no. 147 of February 15th 2006, Art. 3 and 4).
aration (Start-up prohibition)
so built to be assembled
. Therefore, the Manufacturer hereby states that the cabinet may not be started up until the
co rporated or will become a part of has been identified and its compliance with the provisions of
tions
abinets, please follow the instructions indicated below and refer to Fig. 15:
ose and ad just the feet, to obtain a perfect alignment (Ref. 1).
D4x40 in the aluminium top trim.
ts usi ng four threaded bars M8x125 and relevant nuts and washers (Ref. 2) delivered with the
nels close to the uprights.
ng the pr oper screws in the holes drilled in the uprights (Ref. 3) as we
and relative nuts.
the back panels again.
orks with screws and nuts - ref. 5, picture 15B (only for Argus Doors / Brioni 2 Doors).
nd pipe installation
pe installation can be seen at FIG. 16.
IG.17, 18 19 and 20.
e seen F
t
ion
of product conformity can be requested by filling in the form available a the internet address:
conformi ty
ht the unit and ask for original spare parts.
sulation of the cabinet is (R134A).
as load is under 3 kg.
in line with other items of machinery to produce a machine, as defined
sed of carele ssly and can be recycled by
the machine referred to in
ll as in the brackets (Ref.
ly.
ed
for
circuit,
23