Idiomas disponibles
Idiomas disponibles
To maintain complete control when cutting through, release the cutting pressure near the end of the
cut without relaxing the grip on the chain saw handles. Don't let the chain contact the ground. After
completing the cut, wait for the saw chain to stop before you move the chain saw. Always stop the
motor before moving from tree to tree.
8. MAINTENANCE AND CLEANING
WARNING: Inspect the chain saw. Regular inspection is the first step to proper Maintenance.
By following the guidelines below, you can maximize safety and satisfaction. Should you identify any
damaged or excessively worn parts, replace them immediately.
WARNING: Remove the battery pack from the chain saw. Before inspecting, cleaning, or perfor-
ming Maintenance. A Battery operated tool with the battery pack inserted is always on and can start
accidentally.
8.1 Before each use
a. Handles: Front and rear handles should not have cracks or other damage. They should be clean
and dry.
b. Hand Guard: The hand guard should be free of damage and able to move easily back and forth.
c. Guide Bar: The guide bar should be straight and free of chips, cracks, or excessive wear.
d. Saw Chain: The chain should be properly tensioned, and all components free of cracks, chips, or
excessive wear.
e. Side Cover: The side cover should be free of cracks or other damage. It should fit tightly to the
saw body with no warping. Make sure the chain catch is free of cracks.
f. Battery Pack: The battery pack should be clean, dry, with no signs of puncture, impact, or other
damage. The contacts should be clean, dry and free of debris.
g. Battery Holder: The battery holder and contacts should be clean, dry, and free of debris.
h. Chain Brake: Test the chain brake to make sure it is functioning properly.
i. Oil Level: Oil should fill the inspection window. If not, fill the oil reservoir before use.
j. Motor Cover: Check for cracks in the cover and debris in the air intake vents.
17
Fig. 19
