Idiomas disponibles
Idiomas disponibles
ENGLISH
When the log is supported on one end cut 1/3 the diameter from the underside (underbuck). Then
make the finished cut by overbucking to meet the first cut. (Fig.17).
When the log is supported on both ends, cut 1/3 of that diameter from the top overbuck. Then make
the finished cut by underbucking the lower 2/3 to meet the first cut. (Fig.18).
When bucking on a slope always stand on the uphill side of the log. (Fig.19).
16
Fig. 17
Fig. 18
