Parkside PZM 2 A2 Instrucciones De Utilización Y De Seguridad página 64

Idiomas disponibles
  • ES

Idiomas disponibles

WEAR PROTECTIVE
GLOVES! Leaked or damaged
batteries / rechargeable
batteries can cause burns on
contact with the skin . Wear
suitable protective gloves at all
times if such an event occurs .
Remove batteries / rechargeable
 
batteries if the product will not be
used for a longer period .
Risk of damage of the product
Only use the specified type of
 
battery / rechargeable battery!
Insert batteries / rechargeable
 
batteries according to polarity
marks (+) and (–) on the battery /
rechargeable battery and the product .
Clean the contacts on the battery /
 
rechargeable battery and in the
battery compartment before inserting!
Remove exhausted batteries /
 
rechargeable batteries from the
product immediately .
˜ Before first use
After unpacking the product, check
 
if the delivery is complete and if all
parts are in good condition . Remove
all packing materials before use .
Remove the protective film from the
 
display
.
2 ]
[
Do not use the product if it should be
 
damaged .
64 GB/MT
˜ Inserting/replacing the
batteries
Loosen the screw
 
compartment
[
10 ]
compartment's cover .
Replace the old batteries with new
 
batteries of same type . Observe the
correct polarity (shown on the battery
compartment
10 ]
[
Reattach the battery compartment's
 
cover . Tighten the previously
10 ]
[
loosened screw
NOTES:
Before opening the battery
 
compartment: Switch off the product .
Remove both test probes
any circuit .
If the battery is low,
 
in the display
[
2 ]
to ensure that the product continues to
work properly .
˜ Start-up
˜ Switching on/off
Switching on: Turn the rotary knob
 
in a clockwise direction away from
OFF to any other position . The display
switches on .
2 ]
[
Switching off: Turn the rotary knob
 
to OFF . The display
of the battery
11 ]
[
. Remove the battery
) .
.
11 ]
[
from
1 ]
[
[
8 ]
is shown
21 ]
[
. Replace the battery
6 ]
[
switches off .
[
2 ]
6 ]
[
loading