Current Terminal Test - Keysight U1251B Guia Del Usuario

6 Performance Tests and Calibration

Current terminal test

This test determines if the input warning of the current terminal test is functioning
properly.
The meter sounds an alert beep when the test lead is inserted into the A terminal
but the rotary switch is not set to mA.A function. The primary display will indicate
"A-Err" as shown in
test lead is removed from "A" terminal.
Before conducting this test, make sure the beep function is not disabled in
NOTE
setup.
Figure 6-2
150
Figure 6-2. The primary display will keep flashing unless the
Input warning
Keysight U1251B and U1252B User's and Service Guide