Idiomas disponibles
Idiomas disponibles
Assembly
Observe the relevant national regulations and the generally
recognized rules of technology for the assembly and operation.
1. Choose a suitable installation location. Make sure that the
mounting location is free of any concealed power lines in the wall
or behind wall cladding. The side walls of the equipment must
not be in direct contact with walls or similar obstacles. Sufficient
spacing is ensured by using the enclosed external brackets.
2. For secure fastening, prepare the location holes for installation
with the enclosed external brackets according to the dimensional
drawing or by marking. For values, see technical data.
3. Break the external brackets apart and mount them at the intended
positions.
34
4. Attach the back of the box to the intended mounting location and
fasten it with roundhead screws (flat underside).
5. Prepare cable entry holes with appropriate drills and use AXM ..
cable glands. Use the drill markings and observe the assembly
instructions for AXM cable glands!
6. For cable junction boxes type KX... mount the terminal at the
designated positions in the box with its appropriate terminal
support.
Insert the cable through the cable gland as specified in the
assembly instructions AXM .. .
Dismantle the conductor end according to drawing, then insert it
into the terminal and tighten it with a screwdriver. For values refer
to technical data
35
