Lanaform Skin Mass Manual Del Usuario página 5

Ocultar thumbs Ver también para Skin Mass:
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 18
How to hold the
appliance
The Skin Mass operates via a 220 volts AC
adapter. Connect the adapter to a plug sock-
et and the other end to the female input con-
nector located on the front of the appliance.
Hold the unit in the palm of your hand using
the strap in the direction of the STOP button
and the cable.
Adjusting the strap 1
The strap can be adjusted to make using the
massager more comfortable.
Press the two ribbed buttons inside the strap
and slide them away from the appliance. Raise
the metal stem located inside the strap and se-
lect one of the three positioning slots. The strap
can be adjusted on both sides of the appliance.
After adjusting the strap, replace the clip slid-
ing it into the appliance until you hear a click.
Operation 2
In order to understand how the product op-
erates better, place it in front of you as shown
in the photo.
01 "High" - "Low" wheel indi-
cating the intensity.
02 ON / OFF (0) switch which also
includes the 1, 2 and 3 functions of
the squeezing-rolling system.
03 Indicator light to show which
program is being used.
Position 3
Position 0
The red light comes on when the appliance is
plugged in and operational.
E-IM-SkinMass-Lot001.indd 5
E-IM-SkinMass-Lot001.indd 5
Position 1
This first position on your appliance starts the
movement of the gentle roller that makes your
skin more supple and gently raises it (the red
light and green light 1 come on).
Position 2
This starts the adjustment of the Skin Mass'
suction mode as well as the movement of the
gentle roller (the red light as well as the green
lights 1 and 2 come on).
Position 3
This program adds vibration mode for a deep and
even more pleasant massage (all the lights are on).
During operation of programs 2 and 3, you can
adjust the suction intensity using the "high-
low" wheel.
We always advise starting your session us-
ing the lowest intensity and then progressive-
ly increasing it.
Stop Button 4
By pressing the central button you can switch
off the suction and the movement of the roll-
ers when you so wish.
Instructions for use
Step 1
Make sure that your skin is clean and dry. Ap-
ply cream to the areas to be treated, area by
area so as to ensure that it does not penetrate
into your skin before you can use the Skin Mass.
Find a comfortable position and place the
Skin Mass on your skin on the desired part
of your body.
Switch the Skin Mass on and start your mas-
sage in position The rollers will massage your
skin and prepare it for the session.
Use the appliance from bottom to top towards
your heart.
15/09/2021 10:50:28
15/09/2021 10:50:28
loading

Este manual también es adecuado para:

La11022002