Idiomas disponibles
Idiomas disponibles
Flexible AC Current Clamp meter with Datalogger / English
6. General Specifications
Display
3000 counts backlit LCD
Low Battery indication
"
" is displayed
Over-range indication
"OL" display
o
o
Operating Temperature
5
C to 40
C(41
o
o
Storage Temperature
-20
C to 60
C(-4
Operating Humidity
Max 80% up to 31
o
o
40
C(104
F)
Storage Humidity
<80%
Operating Altitude
7000ft. (2000meters)maximum.
Battery
1.5V "AAA" Size Battery x 2
Auto power OFF
After approx. 15 minutes
Safety Standard
EN61010-1, EN61010-2-032, EN61326-1. Overvoltage
Category III 1000V and Category IV 600V, Pollution
Degree 2.
7. Operation
7-1. AC Current Measurements
First, the flexible coil interface position, twist to the lock position. The coil wire to
measure the single ring, and flexible coil torsion interface position to the closed position.
Press the power button to boot, and the current value will be displayed on the LCD
screen.
YES
4
o
o
F to 104
F)
o
o
F to 140
F)
o
o
C (87
F)decreasing linearly to 50% at
NO
Flexible AC Current Clamp meter with Datalogger / English
7-2.Power button
Short press the power button to boot, long press the power button 1- to shut down.
7-3.Frequency button
In the process of measuring the AC current, the Hz key will enter the frequency
measurement mode, and the frequency value will be displayed on the LCD screen.
7-4.Data Hold/
Button
In the alternating current AC current measurement and frequency measurement process,
press the HOLD button, the data will remain on the LCD screen, easy to see. Long press
this button, will enter the Bluetooth transfer mode.
7-5.LCD Backlight Button
The LCD is equipped with backlighting for easier viewing, especially in dimly lit areas.
Press the backlight button to turn the backlight on. Press again to turn the backlight
off. Note that the meter does have an auto power off feature as described below.
7-6.INRUSH Button
Inrush current measurement function in the manual measurement mode, the need for
professionals to predict the value of the inrush current, and then select the appropriate
measuring range, to ensure the accuracy of the measurement.
• Short press "INRUSH" key to enter "INRUSH" measurement mode, LCD screen display
"----", at this time the instrument is preset in the 3000A range.
• After entering the INRUSH measurement mode, long press "INRUSH" key, can
conversion to 30.00A measurement range; long again, according to the "INRUSH" bond,
conversion to 300.0A measurement range; long again, according to the "INRUSH" key,
conversion to 3000A measurement range.
• The preset range, starting with electrical equipment, inrush current value will remain
on the LCD screen. If you want to measure again, you need to re-enter the measurement
model.
• Enter the "INRUSH" mode, and then short press "INRUSH" key, you can exit the
measurement model.
5
