Whirlpool WFC8090GX Manual De Uso Y Cuidado E Instrucciones De Instalación página 64

12.
Touch START/PAUSE
button to begin cycle
Touch and hold the START/PAUSE button to start the cycle.
To pause a cycle in progress, touch the START/PAUSE button
once; then touch again to continue the cycle. To cancel a
cycle, touch the "X" on the touch screen to the right of the
estimated time remaining
Once you touch the START/PAUSE button, you will hear
the door lock. The washer/dryer door will remain locked
during a wash cycle.
13.
Touch POWER button to turn off
washer/dryer after cycle ends
Touch the POWER button to turn off the washer/dryer at the
end of a cycle. The Power button is also used to turn on the
washer/dryer before use.
14.
Remove garments promptly
after cycle is finished
After a wash-only cycle, promptly remove
garments after cycle has completed to avoid
odor and rusting of metal objects on garments.
When unloading garments, pull back the door seal and check for
small items between the tub and the washer/dryer drum.
If you will be unable to remove the load promptly after a wash-
only cycle, use the Tumble Fresh option (see Step 10, page 62).
After a wash and dry cycle or a dry-only cycle, promptly
remove garments after cycle has completed to reduce wrinkling.
If you will be unable to remove a load promptly, use the Wrinkle
Shield option (see Step 10, page 62).
NOTES:
■ The door will remain locked while the Tumble Fresh option is
active after a wash-only cycle. To cancel the Tumble Fresh
option and unlock the door, touch the "X" on the touch screen
to the right of the estimated time remaining.
■ This washer/dryer has a tight seal to avoid water leaks.
To avoid odors, leave the door open to allow the washer/dryer
to dry between uses.
■ If a dry cycle is interrupted and the load removed before
the cool-down period at the end of the cycle, the load will
be very hot.
64
Setting a delayed start
4:28
What to Wash
REGULAR
Temperature Spin Speed
WARM EXTRA FAST
Touch POWER until the indicators turn on. From the home
screen, make sure the washer/dryer is set to the correct time
and date (if it is not, see Step 11 on page 62 for instructions
on how to set the time and date).
Touch the clock icon on the far right portion of the touch
screen. The "Select a start time" screen will show on the
display. Scroll horizontally to select a preferred start time for
your wash or dry cycle. The times will display in 15-minute
increments. Press OKAY to set the start time. The display will
return to the home screen and the clock icon will turn brown.
To delete or modify the delayed start, press the clock icon
again and follow the screen prompts.
3:15
How to Wash
NORMAL
Auto Dry
Dry