Using The All-In-One Washer/Dryer - Whirlpool WFC8090GX Manual De Uso Y Cuidado E Instrucciones De Instalación

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Using the All-In-One Washer/Dryer

First wash cycle without laundry
Before washing clothes for the first time, set up the Load & Go
bulk dispenser (see page 58). Choose the Regular (What to Wash)
and Quick (How to Wash) cycle and run it without clothes. Use
only HE detergent. This initial cycle serves to ensure the interior
is clean and the bulk dispenser is primed and ready for use
before washing clothes.
If using liquid HE detergent in both Dispenser 1 and Dispenser 2,
you will need to run a second cycle without laundry as indicated
above to prime Dispenser 2 and clean the interior. Using the
Tools button, make sure that Dispenser 1 is disabled when
priming Dispenser 2 for detergent.
1.
Sort and prepare your laundry
Sort items by recommended cycle, water temperature,
and colorfastness. Separate heavily soiled items from lightly
soiled. Separate delicate items from sturdy fabrics. Treat
stains promptly and check for colorfastness by testing stain
remover products on an inside seam.
IMPORTANT:
■ Empty pockets. Loose change, buttons, or any small
object can plug pumps and may require a service call.
■ Close zippers, fasten hooks, tie strings and sashes,
and remove non-washable trim and ornaments.
■ Mend rips and tears to avoid further damage to items
during washing.
■ Turn knits inside out to prevent pilling. Separate lint-takers
from lint-givers. Synthetics, knits, and corduroy fabrics will
pick up lint from towels, rugs, and chenille fabrics.
■ Do not dry garments if stains remain after washing,
because heat can set stains into fabric.
■ Always read and follow fabric care labels and laundry
product instructions. Improper usage may cause damage
to your garments.
60
2.
If desired, instead of liquid detergent,
add powdered HE detergent and/or
laundry products
Powdered HE detergent, single-dose laundry packets, Oxi-type
boosters, or scented crystals can be added to the drum prior to
adding laundry. Make sure that the Load & Go bulk dispenser is
disabled or off (see Step 11 on page 62), and skip Step 4 when
using powdered HE detergent or single-dose laundry packets.
NOTES:
■ Always follow manufacturer's instructions.
■ Do not use chlorine bleach.
3.
Load laundry into washer/dryer
Place a load of sorted items loosely in the washer/dryer.
Items need to move freely for best cleaning and to reduce
wrinkling and tangling. If using the drying option, loading
the drum half full or less and not interrupting the drying cycle
by opening the door will improve drying performance and
cycle time. Close the washer/dryer door by pushing it firmly
until the latch clicks.
■ Mix large and small items and avoid washing single items.
Load evenly.
■ Wash small items in mesh garment bags. For multiple
items, use more than one bag and fill bags equally.

Hide quick links:

Tabla de contenido

Solución de problemas

loading

Tabla de contenido