Idiomas disponibles
Idiomas disponibles
Operating instructions
6
Maintenance and repair
Interval
every six months
Fault description
Appliance does not keep
food hot
Gantry lamp module
does not light up
DANGER
Electrical hazard
Electricity is a serious hazard and can cause injury or even death.
−
Disconnect the appliance from the power supply before starting
any cleaning and maintenance work.
−
Secure the appliance against being switched on again.
−
Do not clean the device with steam cleaners or high-pressure
cleaners.
WARNING
Hot surface
The stainless steel surfaces of the heated wells are hot after opera-
tion. Touching them can lead to burns.
−
Let the appliance cool down sufficiently before cleaning.
6.1
Maintenance intervals
Regularly check that the following components are functioning prop-
erly:
Maintenance work
Tightness of the silicone joints
6.2
Troubleshooting
In the event of malfunctions and complaints within the guarantee
period, contact our service partners. After the guarantee period has
expired, have any necessary repair work carried out by our service
partners or qualified electricians.
Cause
On/off switch defective.
Power control in initial position Set power control higher
Connecting lead defective
Infrared lamp defective
Wiring defective
Infrared lamp defective
Personnel
Operator
Remedy
Replace on/off switch
Have it checked and
repaired if necessary by an
authorised specialist
Replace infrared lamp
Have it checked and
repaired if necessary by an
authorised specialist
Replace infrared lamp
Therma Dry heated well
Personnel
Electrician
Operating staff
Electrician
Maintenance engi-
neer
Electrician
Maintenance engi-
neer
19 / 20
