Idiomas disponibles
Idiomas disponibles
ruler (straight edge) against the side of the
guide bar and 'cutter side plates'. If there is
a gap between the ruler and guide bar the
guide bar 'rail' is normal. If there is no gap
bar) the guide bar 'rail' is worn and needs
to be replaced with a new one of the same
type.
6. Turn the guide bar 180° to allow even wear,
thereby extending the life span of the guide
bar.
7. Check the saw chain for possible wear
and damages. Replace it with a new one
if required. Experienced user can sharpen
a dull saw chain (see section "Saw chain
sharpening" below).
8. Reassemble the saw chain and the guide
bar. See ASSEMBLY.
Examine the unit thoroughly for worn, loose
or damaged parts. If you need to repair
or replace a part, contact Senix customer
service at 1-800-261-3981.
• Clean the unit before storing or transporting.
Be sure to secure the unit while
transporting.
• Remove the battery pack before storing.
Charge the battery completely before long-
term storage.
• When battery pack is not in use, keep it
away from other metal objects like paper
clips, coins, keys, nails, screws, or other
small metal objects that can make a
connection from one terminal to another.
• Store the tool out of reach for children
and other unauthorized persons in a well-
ventilated, dry and frost- free environment.
• Protect the machine against dusts and
moisture.
• Always protect the blades with a scabbard
(blade cover) when transporting or storing
the chain saw. Carefully handling the chain
saw greatly reduces the risk of accidentally
touching the sharp cutting blades.
WWW.SENIXTOOLS.COM
• Store the unit in a clean, dry place. Cover it
in order to provide added protection.
19
