Ottobock 8E33-7 Instrucciones De Uso página 10

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 25
Attention:
Driving Vehicles
The ability of arm prosthesis wearers to operate a vehicle is determined on a case-by-case
basis. Factors include the type of fitting (amputation level, unilateral or bilateral, residual limb
conditions, design of the prosthesis) and the individual abilities of the arm prosthesis wearer�
Observe your country's national driving laws when operating a vehicle. For insurance purpo-
ses, have your driving ability examined and approved by an authorised test centre. In general,
Ottobock recommends that the vehicle be professionally retrofitted (e.g. with a steering fork) to
meet each user's individual needs� It is imperative that the driver is able to operate the vehicle
without any risk with the System Electric Greifer turned off. Driving with the System Electric
Greifer ON may present a risk if the System Electric Greifer inadvertently moves due to unin-
tentional muscle contraction or other causes�
Caution!
The 8E33=7 Electric Greifer is equipped with a quick-disconnect adapter� Before using it to
drive a vehicle, it must be positioned in such a way that slight rotation of the Greifer- which might
occur when steering a car - will not dis connect the Greifer from the prosthesis�
These products may not be disposed of with household waste in some jurisdictions.
Disposal that is not in accordance with the regulations of your country may have a
detrimental impact on health and the environment� Please observe the information
provided by the responsible authorities in your country regarding return and collection
processes�
3 Scope of delivery
1 pc� 8E33=7 Electric Greifer (with system wrist joint and quick-disconnect adapter)
or
1 pc� 8E34=7 Electric Greifer (with friction joint and lamination ring)
1 pc� 647H382 instructions for use
4 Description and function
8E33=7:
Electric Greifer with System Hand Quick-Disconnect. Electrical connection
to the forearm via coaxial bushing�
8E34=7:
Electric Greifer with Friction Joint and Lamination Ring. Electrical connection
to the forearm via cable (not illustrated)�
Both types of Electric Greifers offer Digital Twin Control.
The Digital Twin Control system provides both a digital control mode (dual site) and a double
channel control mode (single site) in the same terminal device� The desired control mode can
be selected by inserting or removing the 13E189 Function Plug. The digital mode (dual site) is
controlled by two electrodes and the double channel mode (single site) is controlled by only one
electrode – either 13E68 or 13E125�
The Greifer's coaxial bushing or the cable which exits out of the Greifer are marked with a white
ring for identification purposes.
The System Electric Greifer is delivered in digital mode (dual site) with the function plug in-
serted�
10 | Ottobock
8E33=7 / 8E34=7
Tabla de contenido
loading

Este manual también es adecuado para:

8e34-7

Tabla de contenido