PNI PMR R18 Manual De Usuario página 3

Safety warnings
DO NOT operate the radio without the antenna attached, as this may damage the radio and may also cause RF exposure limits to be
exceeded. The antenna is supplied together with this radio and cannot be detached.
DO NOT transmit more than 50% of the total time using the radio, more than 50% of the time may cause RF exposure compliance
requirements to be exceeded.
During transmissions, your radio generates RF energy that may cause interference with other devices or systems. To avoid such
interference, turn off the radio in areas where signs indicating this are displayed.
DO NOT use the radio in areas sensitive to electromagnetic radiation, such as hospitals, airplanes and places with a risk of explosion.
Hold the radio in a vertical position at least 2.5 cm (one inch) from your head. Respecting this distance is important because RF
exposure decreases with increasing distance from the antenna.
DO NOT use a different type of battery than the one recommended by the manufacturer.
When the life of the battery has expired, do not throw the battery anywhere, take it to a specialized collection center.
Warnings regarding exposure to RF energy
Do not use this device if the safety and operating requirements described in this manual are not met.
This radio uses electromagnetic energy in the radio frequency (RF) spectrum to allow remote communications between two or more
users. RF energy, when used improperly, can cause biological damage.
All PNI radios are designed, manufactured and tested to ensure they meet RF exposure levels set by law.
These instructions are important because they inform users about exposure to RF energy and provide simple procedures for
controlling it. Please refer to the following website http://www.who.int/en/ for more information on exposure to RF energy.
The user manual for this device includes information and operating instructions necessary to control RF exposure and meet
compliance requirements.
To comply with legal requirements, device repair should only be performed by or under the supervision of a certified person. Do not
open the case of the device and do not repair it yourself in case of failure.
User manual - 3