Motorola MTM800 Manual Del Usuario página 22

Getting Started
Powering On/Off (On-Off/End/Home Key or Rotary
Knob Push Button)
To power On, press and hold
button. Your MTM800 Enhanced performs a self-check and
registration routine. After successful registration, the MTM800
Enhanced is in service.
To power Off, press and hold
Powering Off message is displayed.
Powering On (Emergency Button)
Press and hold the Emergency button to power On. The MTM800
Enhanced will power On in Emergency Mode or in standard mode
(as programmed).
Powering On with Transmit Inhibit (TXI) Active
Transmit Inhibit is a feature allowing you to switch off transmission
before entering a Radio-Frequency (RF) sensitive area. To activate
this feature, press the Menu button and select More...> Networks >
TXI Mode > Activate.
Warning:
! !
Pressing the Emergency button, even if Transmit Inhibit is activated,
causes the MTM800 Enhanced to transmit immediately. The MTM800
Enhanced must NOT be within the RF sensitive area when entering
Emergency Mode.
The TXI Mode remains active at power On. You will be asked
whether to leave the TXI Mode On or not.
Warning:
! !
Ensure you have left the RF sensitive area before deactivating Transmit
Inhibit.
Press the Yes soft key to deactivate the TXI Mode. If the MTM800
Enhanced was previously used in Trunked Mode, it will register to
the network. If the MTM800 Enhanced was previously used in Direct
Mode, it will remain in Direct Mode.
Press No in Trunked Mode and the MTM800 Enhanced powers
down; press No in Direct Mode and you remain in Direct Mode with
TXI selected.
20
All manuals and user guides at all-guides.com
, or press the rotary knob push
. You will hear a beep and the