Idiomas disponibles
Idiomas disponibles
1. All functions of your wheelchair are available.
2. Only speed setting 1 is available.
3. Driving your wheelchair is no longer possible. Raise the backrest until the block is
lifted.
To notify the user that all driving is inhibited, the drive wheel LED on the actuator status indicator
slowly pulses on and off, as well as the LED referring to the adjustment that causes the block.
The LED's pulse for the duration of driving or adjusting function demand.
E.g. Figure 8: The backrest and drive wheel LED's on the indicator are pulsing. This means
that the backrest inclination is too large, causing driving inhibition.
To lift the speed/driving limitations, lower the lift to standard (lowest) position, and adjust your
seat and backrest to upright sitting position.
4.8 Horn
Press the horn button (6) to warn bystanders, see Figure 1. The horn will sound as long as the
button is pressed.
4.9 Lighting
4.9.1 Front and back lights
To switch on the front and back lights,
press and quickly release the right-hand
lighting button (A) once. The LED behind
the right-hand button will remain lit as long
as the lights are on.
To switch off the lights, press the right-hand or left-hand lighting button (A/B).
4.9.2 Hazard warning lights
To switch on the hazard warning lights, press and quickly release the left-hand lighting
button (B) once. The LED's behind the left-hand and right-hand button will flash on and off
as long as the hazard warning lights are operating.
To switch off the hazard warning lights, press the left-hand or right-hand lighting button
(A/B).
4.9.3 Indicator lights
To switch on either indicator, press the left-hand or right-hand lighting button once,
depending on the direction you want to go. The LED behind the button will flash on and off
as long as the indicator lights in that direction are operating.
To switch off either indicator, press the left-hand or right-hand lighting button.
When the hazard warning lights are on, they stay on, even when the operating console
is switched off by the ON/OFF button.
The main lights go out when the operating console is switched off.
B
11
LiNX 200
2023-03
Operating console functions
A
Operation of the lights
EN
NL
