PATONA PREMIUM Serie Manual De Instrucciones página 10

• After switching on, you will see a battery symbol in the upper right corner of the display.
• The icon shows increasing or decreasing progressively 3x approx. 30% battery power.
• If the battery symbol flashes, the battery is low and needs to be charged. When the battery is low,
the lamp output power is automatically reduced. If no power pack is connected, the lamp will be
switched off after approx. 10 minutes.
» Charging
• To charge the lamp, connect a compatible power adapter.
• The battery icon progressively indicates the charging process.
• If the battery is fully charged and the power supply remains connected, the lamp can continue to be
powered by the power supply.
► Remote control
1. Power button
2. Display
3. Radio settings button
4. FX button
» Installation
• Insert 2x AAA batteries or rechargeable batteries into the remote control.
• Press the ON/OFF button.
Hint:
To switch off the remote control, press and hold the ON/OFF button, the display goes out.
» Connect
• Press the RADIO SETTINGS button. The 2.4G menu is called up.
• Use the NAVIGATION/SELECT buttons to set the values of the Ch and Gr (channel and group) para-
meters. Make sure these match the values of the lamp.
• With the FN button you can switch the lamps of the respective group on/off.
Hints for multiple lamps:
You can set other channels to control other lamps with the remote control.
01
02
05
04
03 06
FX CCT HSI
+
07
09
FN
DIM
08
3200K 5600K 6500K
Red Green Blue
10
Cyan Magenta Yellow
Pinnk Violet Orange
5. CCT button
6. HSI button
7. Navigation, selection buttons
8. Button FN function key
- 9 -
11
9. +/- buttons
10. Speed dial buttons
11. Battery compartment 2x
AAA