Festool CTH 26 E/a Manual De Instrucciones página 23

WARNING
Hazardous dust
Damage to the respiratory passage
► Wipe down the mobile dust extractor and
clean all accessories thoroughly using the
extractor (inside and out) before removing
from the working area.
► Parts that you were not able to clean thor­
oughly must be sealed in an airtight plastic
bag prior to transportation.
► Wear a dust mask!
The machine shall be stored indoors on­
ly.
► Place the mobile dust extractor in a dry
room inaccessible to unauthorised users.
Observe for dust reduced transport:
► Observe for dust reduced transport:
► Ensure a secure fixation during transport.
Only transport the appliance with closed
sealing plug.
9 Service and maintenance
WARNING
Risk of injury, electric shock
► Always pull the mains plug from the socket
before performing any servicing and main­
tenance work.
► All maintenance and repair work which re­
quires the motor housing to be opened
should always be carried out by an author­
ised service workshop.
Customer service and repairs must only be
carried out by the manufacturer or service
workshops: Find the nearest address at:
www.festool.com/Service
EKAT
4
5
3
2
1
Always use original Festool spare parts. Order
no. at: www.festool.com/Service
Damaged safety devices and components must
be properly repaired or replaced in a recog­
nised specialist workshop, unless otherwise in­
dicated in the operating manual.
Observe the following information:
– Dust-related inspection (e.g. for filter dam­
age, tightness of the machine and function
of the control devices) by the manufacturer
or an instructed person at least once a
year.
– In addition, the effectiveness of the ma­
chine's filter should be tested at least an­
nually or more frequently, as may be stipu­
lated in national regulations. The test pro­
cedure that can be used to test the ma­
chine's effectiveness is specified in EN
60335-2-69 AA.22.201.2. If the machine
fails the test it must be repeated with a new
main filter.
– Dispose of components that cannot be
cleaned. Use impermeable bags to do so.
Observe the applicable disposal provisions!
– Provided maintenance personnel or other
persons in the vicinity are not endangered,
the user must dismantle and clean the ma­
chine prior to performing maintenance
work. Appropriate precautionary measures
include decontaminating the machine prior
to disassembly, making provisions for lo­
cally filtered forced ventilation at the loca­
tion of machine disassembly, cleaning the
maintenance area and appropriate person­
al protective equipment.
Information on sending devices to the repair
workshop
Contact the repair workshop before send­
ing any devices in order to clarify any po­
tential hazards related to extracted haz­
ardous substances. Where applicable, the
repair workshop will send you a special
plastic bag.
Pay attention to the following information,
which is intended to protect persons during
transportation and in the repair workshop:
► Clean the device thoroughly (inside and
out).
► Remove the filter/disposal bag.
► Where applicable, pack the device in the
plastic bag that has been provided so that it
is air-tight.
► Attach a list of the extracted hazardous sub­
stances on the outside of the air-tight pack­
aging.
English
23