Wiring; Eav Wiring Plan + Tappet Contact And 12 V Dc Frame Power Supply - Winkhaus blueMatic EAV Instrucciones De Montaje

blueMatic EAV
EN
3.3

Wiring

3.3.1

EAV wiring plan + tappet contact and 12 V DC frame power supply

3
Figure 3.3.1-1:
Tappet contact and frame power supply, each in the profile with cable
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
STK/RNT
yellow, grey, pink
not used
Do not connect
external voltage!
38
green
Opening signal
(external)
brown - 0 V DC
white + 12 V DC
white
brown
green
yellow
grey
pink
green + white =
Input for external poten-
tial-free contact (e.g. un-
locking via intercom sys-
tem/open button)
P
230 V AC
N
Physical earth
Cable bushing for protection
in the profile drill hole
fasten with screw (4 mm)
Metal
(reinforcement, profile)
5051251
+ 12 V DC
- 0 V DC
For external
signal assign-
ment, connec-
tion diagram
Tappet contact/
Cable transition