Handlebar Switches - Benelli TRK 251 Manual Del Propietário

Handlebar switches

Left
1. Horn switch " "
2. Dimmer/switch " /
3. Turn signal switch "
4. Passing button
5. ABS switch (optional)
ABS
USOeMANUTENZIONE_TRK251_2019.indb 7
Right
4
2
5
3
1
1. Run/Start switch "
2. Hazard switch "
3. Electric ignition button
" 4. Adjustment / selection multifunction
/ " meter button
Horn switch "
Press this switch to sound the horn.
Dimmer/switch "
Set this switch to "
and to "
Turn signal switch "
To signal a right-hand turn, push this swi-
tch to "
push this switch to "
the switch returns to the center position.
To cancel the turn signal lights, push the
Instrument and control functions
1
4
2
3
/ "
"
"
/ "
" for the high beam
" for the low beam.
/ "
". To signal a left-hand turn,
". When released,
3 - 7
switch in after it has returned to the cen-
ter position.
Passing button
Press this button (daytime) to enable la-
shing lights.
Run/Start switch " / "
To crank the engine with the starter, set
this switch to " ", see page 5-1 for star-
ting instructions prior to starting the en-
gine.
Set this switch to " " to stop the engine in
case of an emergency, such as when the
vehicle overturns or when the throttle
cable is stuck.
Electric ignition button
Press this button to start the engine with
the starter device.
EN
3
27/02/2019 12:09:19