Tabla de contenido
Idiomas disponibles
Idiomas disponibles
4.4 How can I use RESTUBE for someone else in need of help?
WARNING
Notify professional assistance and third parties first. Do not endanger your own safety!
RESTUBE is not intended for towing people.
•
Use the RESTUBE buoy as a buoyancy aid when approaching the person in need
•
The RESTUBE buoy can be transferred to the person in need if the situation requires
this and both the necessary knowledge and physical condition exist
•
Subsequently, further measures may be taken to assist the person
4.5 Inflating by mouth
WARNING
Never inflate the flotation device by mouth and trigger the CO2 cartridge afterwards.
This may cause over-inflation and serious damage.
Never fill buoy with other gases!
Do not fill buoy with the help of an inflation device (e.g., pneumatic pump)!
Please avoid inhaling the CO2 gas from the flotation device when topping up the buoy via
the oral valv
•
Remove buoy from pocket
•
Open the Velcro on the safety leash and unwrap safety leash
•
U nfold buoy completely
•
O pen the cap of the oral valve
•
Inflate buoy with your breath using the valve
4.6 How do I make RESTUBE ready for its next use?
Once RESTUBE has been triggered, it must be made ready to be used again. You will need
an original RESTUBE-CO2-Cartridge with a securing clip.
WARNING
Only the original RESTUBE-CO2-Cartridges are 100% quality-certified, seawater resistant,
rustproof, and the force is tailored to the RESTUBE trigger!
Do not use comparable commercial CO2 cartridges!
These will not guarantee inflation of RESTUBE in an emergency.
The CO2 cartridge (#1)
RESTUBE only guarantees functionality when using the original
RESTUBE-CO2-Cartridge.
•
Remove any dirt (e.g., sand)
•
Remove protective cover from the CO2 cartridge
•
Unscrew the empty CO2 cartridge and dispose of with residual waste
•
Fold away release lever to avoid piercing the new CO2 cartridge
•
Place the new green securing clip on the red indentation on the
trigger mechanism
•
Check the new cartridge for damage
•
Screw the new original-RESTUBE-CO2 cartridge tightly and up to
marking into the trigger mechanism
•
Slide protective cover onto the CO2 cartridge
22
The buoy
Pointed or sharp objects can damage the valve! The buoy can only be folded away
correctly when there is no gas in it.
#2
#3
#4
#5
#1
NOTICE
Empty the buoy completely (#2)
•
Open the cap of the mouthpiece
•
To release the gas from the buoy, plug the back of the cap
into the oral valve
•
Fully release gas by folding or rolling the buoy
•
Close the cap of the oral valve
Longitudinal fold (#3)
•
Spread out the buoy so that the trigger mechanism is in
the top left
•
Fold up the bottom part of the buoy along the horizontal
dotted line
•
Tuck the folded part of the buoy under the CO2 cartridge so
that the oral valve folds away to the left
Zigzag fold (#4)
•
Turn the buoy so that the trigger mechanism is facing
upward
•
Fold over the bottom end of the buoy to the back along
the first solid line
NOTICE
The words "Oben/Top/Haute" must be visible.
•
Fold over the next part to the front along the dotted line
•
Continue until you reach the trigger
•
The buoy is correctly folded if the CO2 cartridge is on the
outside
•
The last fold must be to the back
Wrapping the safety leash around the buoy (#5)
•
Hold the folded buoy firmly in one hand
•
Use the free hand to wrap the safety leash exactly once
around the buoy and the back end of the CO2 cartridge
NOTICE
Do not wrap the remaining safety leash further around the buoy –
store it behind the CO2 cartridge in the pocket.
•
Attach the safety leash to the white velcro 6d
•
Pack away the folded buoy into the pocket
23
Tabla de contenido
