Idiomas disponibles
Idiomas disponibles
Polaris
Robotic Pool Cleaner | Owner's Manual
®
6.6
Program or Cancel Cleaning
Schedules
(not available on all models)
It is still recommended to remove and clean the
filter canister after every cleaning cycle.
1.
Tap the area titled Next Cleaning or go
to System Settings
Schedules.
2.
To program a schedule, select the day of the
week.
3.
Select a start time to begin the cleaning cycle.
4.
Select a cleaning mode. Mode selected will
determine runtime.
5.
Press OK to save the schedule or Delete to
remove permanently.
6.
Repeat steps 2-4 to program additional days.
NOTE: Only one programmed cleaning cycle can be
scheduled per day.
7.
Press BACK or DONE to leave the Edit
Schedule page and return to the main screen.
8.
The next scheduled cleaning cycle will display
near the top of the main screen.
6.7
Temperature Display
(not available on all models)
On some models, the pool water temperature will
be displayed on the main app screen. Accurate
temperature may take a few minutes to display as
the sensor acclimates to the surrounding water
temperature. Temperature will only be displayed
during an in-progress cleaning cycle.
and choose
6.8
LED Lights
1.
Sensor Nav System
Located on the front of the cleaner, this light
has several functions to indicate status:
Blinking Blue: Sensing, Scanning and
Cleaning
*Solid Blue: Cleaning
Blinking Green: Lift System or Spot Cleaning
Solid Green: Remote Control
2.
On some models, an LED light illuminates the
interior area of the body and canister.
*not available on all models
NOTE: LED lights may be difficult to see in sunlight.
6.9
In-App Error Messages and
Troubleshooting
If an error occurs, the status bar will show a
warning symbol and: "Cleaning Interrupted".
1.
Click on the warning symbol to view
troubleshooting advice on how to fix the issue.
2.
Choose Clear Error if you believe you have
fixed the problem and want to re-try. Choose
OK if you want to suspend the cleaner in error
mode and work on the troubleshooting fix at a
later time.
6.10 System Settings
Access System Settings by pressing the gear icon
in the upper right hand corner of the app screen.
ENGLISH
- Indicator Light:
™
Page 13
