Denios HW Instrucciones De Uso página 14

Notes on the operating instructions
1 Notes on the operating instructions
Before you set up and commission your product, ensure you read these operating instructions completely. Always
take note of the safety notices and warnings.
These operating instructions are for anyone who comes into contact with the product, directly or indirectly.
These operating instructions form part of the product. Ensure that these operating instructions are always at hand
next to the product.
1.1 Warnings in the operating instructions
HAZARD
The symbol shows the type of hazard.
Symbol and signal word show a hazard which leads to serious injury or death.
WARNING
The symbol shows the type of hazard.
Symbol and signal word show a hazard which can lead to serious injury or death.
CAUTION
The symbol shows the type of hazard.
Symbol and signal word show a hazard which can lead to minor injury.
NOTICE
Warns of damage to property.
Signal word warns of damage to property or denotes instructions for use and other useful information.
2 Safety instructions
This section gives important notices for safe use of the product. These notices are to protect employees and to
ensure safe, fault-free operation. Warnings relating to use can be found in the corresponding instructions for
use.
The product is built in accordance with the state of the art and the recognised technical rules.
There may be hazards associated with the product, if it is used, maintained or repaired in an incorrect manner,
not in accordance with the intended use or by untrained personnel.
Hazards may arise affecting:
Health and life of personnel

Product and other assets near the product

Follow all the safety instructions in these operating instructions as well as all safety instructions in the
operating instructions of our suppliers which have been provided.
All employees who are to work with this product must confirm by signature that they have read and understood
these operating instructions completely.
Ensure that the national directives and safety regulations relating to hazardous substances, safety directives,
industrial safety and operator duties are observed.
14 / 44 Pince-ciseaux 004_INT 03
Septe
mber
2018