Ferroli ROMEO N RF Manual De Usuario página 88

4.9 Room temperature reading correction
Follow the instructions below to correct the room temperature reading between –2°C and + 2°C in steps of 0.1°C.
1. Press the button for 3 seconds.
2. The display shows parameter CU.
3. Press the button repeatedly until parameter P7 is displayed.
Use the buttons
4. Press any other button to exit the menu.
4.10 Telephone contact input
Normal operation of the REMOTE is guaranteed as long as the telephone contact remains open. The closing
of this contact, indicated on the display with the symbols (), can be used to force the REMOTE to switch off the
heating or to adjust the room temperature to a fixed pre-set value.
Follow the instructions below to set the two functions.
1. Press the button for 3 seconds.
2. The display shows parameter CU.
3. Press the button repeatedly until parameter P8 is displayed.
Set to 0 using the buttons
Set to 1 using the buttons
next parameter P9) when the contact closes.
4. Press the button .
5. The display shows parameter P9.
EN
88
/ to adjust the parameter in 0.1°C increments.
/ to turn heating off when the contact is closed.
/ to adjust the room temperature to a fixed pre-set value (via the
code 3542A980 - Rev. 00 - 01/2022