Time Zone Setting - Techno Line WT 590 Manual De Instrucciones

2. Press the SNOOZE key again to enter the month and date setting (flashing).
3. Use the AL/HR key to set the month and the MODE/MIN key to set the day
4. Press the SNOOZE key again to enter the weekday setting (flashing).
5. Use the MODE/MIN key to set the weekday.
6. Press the SNOOZE key once more to confirm all settings and to exit or do not touch any buttons for
around 8 seconds. The mode will return to normal.

TIME ZONE SETTING:

Time zone "0"=
Central Europe
To change to a different time zone (±9 hours):
1. In normal mode display, press and hold down the MODE/MIN key to enter the time setting mode
2. Use the MODE/MIN key again to select the desired time zone. Each press changes the digits by 1 hour.
3. When the desired time zone is selected, press the SNOOZE key to confirm and exit or wait for about 8
seconds for automatic return to the normal mode display.
Note: If the time zone is changed to another time zone other than "0", the calendar will not be displayed.
BACK-LIGHT:
The LED back-light is automatically switched ON when any keys are pressed. The back-light will be switched on
for approximately 2 seconds before automatically switching OFF. However, if any of the keys are pressed and
held down, then LED back-light will remain ON constantly unit the key is released.
Time zone
Environmental reception effects
The clock obtains the accurate time with wireless technology. Same as all wireless devices, the reception is
maybe affected by the following circumstances:

long transmitting distance

nearby mountains and valleys

near freeway, railway, airports, high voltage cable etc.

near construction site

among tall buildings

inside concrete buildings

near electrical appliances (computers, TV's, etc) and metallic structures

inside moving vehicles
Place the clock at a location with optimal signal, i.e. close to a window and away from metal surfaces or
electrical appliances.
Precautions

This main unit is intended to be used only indoors.

Do not subject the unit to excessive force or shock.

Do not expose the unit to extreme temperatures, direct sunlight, dust or humidity.

Do not immerse in water.

Avoid contact with any corrosive materials.

Do not dispose this unit in a fire as it may explode.