Stihl HT 56 C Manual De Instrucciones página 43

Specifications
EPA / CEPA
The Emission Compliance Period
referred to on the Emissions
Compliance Label indicates the number
of operating hours for which the engine
has been shown to meet Federal
emission requirements.
Category
A = 300 hours
B = 125 hours
C = 50 hours
CARB
The Emission Compliance Period used
on the CARB-Air Index Label indicates
the terms:
Extended = 300 hours
Intermediate = 125 hours
Moderate = 50 hours
Engine
Single cylinder two-stroke engine
Displacement: 1.66 cu. in.
(27.2 cm
Bore: 1.34 in. (34 mm)
Stroke: 1, 18 in.
(30 mm)
Engine power to 1.1 hp (0.8 kW)
ISO 8893: at 8,500 rpm
Idle speed: 2,800 rpm
Cut-off speed (rated): 10,000 rpm
HT 56 C
Ignition System
Electronic magneto ignition
Spark plug (resistor
type):
Electrode gap:
Fuel System
All position diaphragm carburetor with
integral fuel pump
Fuel tank capacity:
Chain Lubrication
Fully automatic, speed-controlled oil
pump with rotary piston
Oil tank capacity:
Weight
dry, without bar and chain
HT 56 C:
Cutting Attachment
Duromatic C guide bars
3
)
Cutting length:
Pitch:
Groove width:
1/4" Rapid chains
Rapid Micro Special (13 RMS)
Pitch:
Drive link gauge:
NGK CMR 6 H
Chain sprocket
0.02 in.
(0.5 mm)
8-tooth for 1/4" (spur sprocket)
Please ask your STIHL dealer for the
latest recommendations on new
bar/chain combinations developed after
publication of this instruction manual.
11.5 fl.oz (0.34 l)
7.4 fl.oz (0.22 L)
14.8 lbs (6.7 kg)
10 in (25 cm)
1/4" (6.36 mm)
0.050 in (1.3 mm)
English
1/4" (6.36 mm)
0.050 in (1.3 mm)
41