Assembling The Unit - Stihl HT 56 C Manual De Instrucciones

English
30° angle drive (special accessory)
1
2
The angle drive keeps the cutting
attachment at an angle of 30° to the
drive tube.
The angle drive may be adjusted on the
drive tube to the following positions only:
1 For cross-cutting vertical branches
and bushes.
2 For a better view of the cutting
attachment.
16

Assembling the Unit

The unit features a split drive tube that
helps save space during transportation.
It unit can be easily disassembled for
transportation – see "Transporting the
Unit".
Connecting the Drive Tube
Do not mount KombiTools – only
use the drive tube with splined
shaft supplied with the machine.
Pull the cap (1) off the end of the
N
front drive tube and keep it in a safe
place for later use – see "Storing the
Machine".
Put the powerhead on the ground so
N
that it rests on the machine support.
Slide the lug (2) on the front drive
N
tube (3) into the slot (4) in the
coupling sleeve as far as stop – if
necessary, turn the front drive
tube (3) back and forth while
pushing it home.
When correctly installed, the red
line (5) (arrow point) must be flush with
1
the end of the coupling sleeve.
Tighten down the star knob (6)
N
firmly.
Attach the shoulder strap to the
N
carrying ring.
4
2
3
5
6
HT 56 C