melitta OPTIMA TIMER Instrucciones De Uso página 8

To maintain value and function of the appliance it has
an integrated descaling programme. The appliance can
be programmed with 4 degrees of water hardness. It
dren.
is set to high water hardness in factory. We recom-
contact
mend an individual adjustment based on your local
degree of hardness. You can ask your local water sup-
ing or in
plier or use a special control strip for determining.
d Timer
To adjust degree of hardness press button „CALC"
(4) and keep it pressed. The display shows the factory
GB
provided presetting. For adjustment press button
„MIN" as long as the display shows your desired
degree of hardness. 2 seconds after releasing the
ater
"CALC" button, the display shows the time again.
Your choosen water hardness is programmed. Last
process.
adjustment maintains even when the appliance will be
rewing
disconnected from socket.
y per-
Coffee preparation
, sensory
To maintain the best aroma of your coffee keep the
ience
coffee packaging always closed and store it in a refrid-
ed by a
gerator. We recommend to use 6g ground coffee per
or recei-
cup for best taste. To secure an optimal brewing
o use the
result fold the filterbag 102
packaging.
useholds
• Fill the removable water tank (6) with fresh, cold
or staff in
water. The needed amount of water based on cups
n agri-
els and to prepare can be read off the cup scale on the
water tank.
uesthou-
• Insert the water tank again.
repairs
• Swivel out the filter (7). Place a filterbag into the
filtercone and fill in your desired quantity of ground
milar
coffee into the filterbag. Swivel filter back until it
snaps in.
• Press „ON/OFF" button (3). The green LED is illu-
coffee
minated and the brewing process starts.
• After end of brewing you can remove the jug from
engh -
the appliance. The drip stop avoids dripping.
ge (1)
• Let the appliance cool down for 5 minutes between
s.
2 brewing cycles.
„MIN"
e
Timer function
2
The appliance is equipped with a timer function. With
s. If you
this function, the brewing process can be started
lay press
automatically at a pre-programmed time.
• Set the desired starting time by using the buttons
nger
• Press the button „TIMER" (5) and keep it pressed.
• Set the desired starting time by using the buttons
„H" and „MIN" (2). A quick run is possible by
e done
When programming first time 00:00 is flashing in
„H" and „MIN" (2). A quick run is possible by
pressing the buttons constantly.
the display.
pressing the buttons constantly.
• After releasing the button „TIMER", the current
• Set the desired starting time by using the buttons
• After releasing the button „TIMER", the current
time appears again after 2 seconds. The choosen
„H" and „MIN" (2). A quick run is possible by
time appears again after 2 seconds. The choosen
starting time for brewing process is programmed. It
pressing the buttons constantly.
starting time for brewing process is programmed. It
remains until a new starting time will be programmed
remains until a new starting time will be programmed
• After releasing the button „TIMER", the current
or when the appliance disconnected from socket.
or when the appliance disconnected from socket.
time appears again after 2 seconds. The choosen
• By pressing the "TIMER" button again shortly, the
starting time for brewing process is programmed. It
• By pressing the "TIMER" button again shortly, the
function is activated for the next brewing cycle. Blue
remains until a new starting time will be programmed
function is activated for the next brewing cycle. Blue
LED light shows activation and the programmed
or when the appliance disconnected from socket.
LED light shows activation and the programmed
starting time is visible in the display for a few
starting time is visible in the display for a few
• By pressing the "TIMER" button again shortly, the
seconds.
seconds.
function is activated for the next brewing cycle. Blue
• The timer-function can be de-activated by a further
LED light shows activation and the programmed
• The timer-function can be de-activated by a further
press on the "TIMER" button. The blue LED light
starting time is visible in the display for a few
press on the "TIMER" button. The blue LED light
expires.
8
seconds.
expires.
• The brewing process can be started independently
• The timer-function can be de-activated by a further
• The brewing process can be started independently
from timer-function by pressing the "ON/OFF"
as described on the
®
starting time is visible in the display for a few
seconds.
• The timer-function can be de-activated by a further
press on the "TIMER" button. The blue LED light
expires.
• The brewing process can be started independently
from timer-function by pressing the "ON/OFF"
button.
Adjustable warmkeeping time
Longterm warmkeeping of the coffee on the warming-
plate leads to loss of taste. Therefore we recommend
a warmkeeping time for not longer than 30 minutes.
This time is presetted for securing an optimal coffee
quality and also to avoid unneeded energy consumption.
If you want to keep your coffee warm for a longer
time, you can set the time in 4 steps until appliance
switches off automatically.
• For setting the warmkeeping time keep the
"ON/OFF" button pressed. 0:30 appears in the
display.
• Set the needed warmkeeping time by pressing the
"MIN" button in 30 minutes steps (up to 2 hours
max.)
• After releasing the "ON/OFF" button, the current
time appears again after 2 seconds. Last setting
maintains even when the appliance will be discon-
nected from socket.
Descaling programme
To secure a proper function of the appliance, it has to
be descaled regularly. We recommend to use Swirl
Oxy-Power or Swirl Citrus-Clean. To simplify this
®
necessary process, the appliance is equipped with a
descaling programme.
• Once the number of brewing cycles, based on the
individual adjustment of water hardness, is reached,
the red LED (4) lights up permanently. This shows
that descaling should be done shortterm.
• To start descaling, fill the watertank with descaling
agent according to the information on its packaging.
• Press "CALC" button (4). The red LED flashes.
• The descaling process takes 25 minutes. The remai-
ning time is shown in the display.
ning time is shown in the display.
• The red LED expires after the descaling process has
6
• The red LED expires after the descaling process has
finished. The appliance switches off automatically and
finished. The appliance switches off automatically and
display shows the current time again.
ning time is shown in the display.
display shows the current time again.
• Clean the appliance after descaling by 2 brewing
5
• The red LED expires after the descaling process has
• Clean the appliance after descaling by 2 brewing
cycles with clear water without coffee to remove
finished. The appliance switches off automatically and
cycles with clear water without coffee to remove
descaler residues.
display shows the current time again.
descaler residues.
• Clean the appliance after descaling by 2 brewing
Cleaning and maintenance
Cleaning and maintenance cycles with clear water without coffee to remove
• Remove cord from socket before you clean the
descaler residues.
• Remove cord from socket before you clean the
appliance.
appliance.
• Never immerse the appliance or cord in water.
Cleaning and maintenance
• Never immerse the appliance or cord in water.
• Clean the surface with a soft, damp cloth.
• Remove cord from socket before you clean the
• Clean the surface with a soft, damp cloth.
• Clean the parts which are in contact with coffee
appliance.
• Clean the parts which are in contact with coffee
after each use. Filter cone and glass jug are dishwas-
• Never immerse the appliance or cord in water.
after each use. Filter cone and glass jug are dishwas-
her safe.
• Clean the surface with a soft, damp cloth.
her safe.
• Water tank can be cleaned under running water.
• Clean the parts which are in contact with coffee
• Water tank can be cleaned under running water.
applia
• Neve
• Clean
• Clean
after
her sa
• Wate
Do no
Hints
• Please
electr
• Packa
reusa
resou
®