Treadmill Centering - SPORTSTECH FX3 Pro Manual De Instrucciones

CENTERING THE TREADMILL
Place the treadmill on a level surface and set it to a maximum of 3.5 km/h
to check if the rotating treadmill is slipping. Make the necessary settings on the adjusting screws for treadmill align-
ment (at the rear end of the device).
See Figure 3: Parts and Controls.
Wenn sich das Laufband nach rechts bewegt:
1. Turn the right adjusting screw
½ turn clockwise.
2. Then turn the left adjusting screw
½ turn counterclockwise.
3. Now check whether the treadmill is properly centered. If not,
repeat this step.
When the treadmill moves to the left:
1. Turn the left adjusting screw
½ turn clockwise.
2. Then turn the right adjusting screw
½ turn counterclockwise.
3. Now check whether the treadmill is properly centered. If not,
repeat this step.

TREADMILL CENTERING

42
1.
2.
2.
1.