Tabla de contenido
Idiomas disponibles
Idiomas disponibles
IRIS
EN
REMOTE CONTROL
The remote control uses an MN21 A23 battery.
How to link the remote control to the unit (for the first time or when the power supply is
interrupted)
Attention
Avoid to keep on pressed the remote control buttons or it will be blocked.
16
TU ESPACIO DE VIDA CONFORTABLE
USER'S HANDBOOK
MANUAL DE USUARIO
1
4
1
Unit's On/Off button. Pressing once turns the unit on and leaves it ready for operation.
Pressing again turns the unit off.
2
3
and
Used to select water pump operating time.
2
Increases pump operating time, so the unit delivers more cooling power.
3
Decreases pump operating time, so the unit delivers less cooling power.
4
Increases and decreases water pump operating time.
Pressing once increases operating time to 20 seconds; pressing a second time increases
the time to 30 seconds; pressing a third time decreases duration to 20 seconds; pressing a
fourth time decreases duration to 10 seconds; and pressing a fifth time disables the pump.
1
With the unit off, press and hold the timer setting button on the unit's control panel (#4 on
page 14) until only the timer operation indicators remain flashing (#6 on page 14).
2
Press the On/Off button on the remote control to make the remote linked with the unit.
3
Check that the unit responds to the commands of the remote control.
2
3
Tabla de contenido
