Connecting The Controller - Dometic Day/Night Controller Instrucciones De Montaje Y De Uso

Installation
5.1

Connecting the controller

➤ Connect the controller as shown in the wiring diagram.
1
UP:--BOTH BLINDS OPEN
MY:-- DAY MODE
DOWN:-- DOWN NIGHT MODE
Pos.
1
2
3
4
5
6
7
8
9
Input signals
The controller should be connected to a regulated 24 Vg power supply
(fig. 1 4) rated at max. 5 A.
Normally Open (N/O) push buttons can be connected to the connection termi-
nals (fig. 1 4). Transmitters from the Somfy Telis range with RTS radio protocol
can be loaded onto the control system. The system can accept up to a maximum
of 36 transmitters.
There are three push buttons on the circuit board to enable easy commissioning
of the system.
6
1
STATUS
2
UP
MY
3
DOWN
J3
DOWN
4
COMMON
MY
COMMON
UP
COMMON
Description
Status LED
DIP switches
Push buttons (UP, MY, DOWN) on circuit board
Connection for N/O push buttons (if wired)
Program button
Receiver LED
Power in and motor output terminals
M1 Top motor
M2 Bottom motor
6
5
PF1
J2
24v DC
0v DC
MOTOR 1 A
MOTOR 2 B
MOTOR 2 A
MOTOR 2 B
MOTOR 2 B
MOTOR 2 A
MOTOR 1 B
MOTOR 1 A
Day/Night controller
7
8
M2
9
M1
0 V DC
24 V DC
EN