Intended Use - Dometic Day/Night Controller Instrucciones De Montaje Y De Uso

Intended use

• Disconnect the controller from the power supply before carrying out any
maintenance.
Health hazard
• Blinds should be stowed before maneuvering to ensure no restriction of the
driver vision.
!
CAUTION! Failure to obey these cautions could result in minor or mod-
erate injury.
Risk of injury
• The controller must only be installed, removed or repaired by qualified or
competent person using suitable fastening material.
A
NOTICE!
Damage hazard
• Blinds should be stowed completely when boat or vehicle is under way.
• Check that the supply voltage is 24 Vg.
• Only use cables with a suitable cross-section.
• Use screws and plugs suitable for the wall construction to fix the controller.
• Ensure that you do not drill through the wall.
3 Intended use
The controller can control window blinds, day/night blinds or roof blinds with
specific software.
This product is only suitable for the intended purpose and application in accor-
dance with these instructions.
This manual provides information that is necessary for proper installation and/or
operation of the product. Poor installation and/or improper operating or main-
tenance will result in unsatisfactory performance and a possible failure.
The manufacturer accepts no liability for any injury or damage to the product
resulting from:
• Incorrect assembly or connection, including excess voltage
• Incorrect maintenance or use of spare parts other than original spare parts
provided by the manufacturer
• Alterations to the product without express permission from the manufacturer
• Use for purposes other than those described in this manual
Dometic reserves the right to change product appearance and product
specifications.
The radio equipment of the device complies with the requirements of the direc-
tive 2014/53/EU. You can find the Declaration of Conformity of the device on
documents.dometic.com.
4
Day/Night controller
EN