Continental ContiPressureCheck Manual De Instrucciones página 83

Log files
The log files that are created when working with the Hand-Held Tool are stored in the
"REPORT" directory on the SD memory card (see Directory structure).
A unique name is automatically assigned to identify the individual log files. This is
made up as follows:
Code letter for the
Vehicle name menu function exe-
cuted
T = Test drive
D = DTC
Max. 19 charac-
I = Installation
ters
V = "Check all tires/
ContiConnect Upload"
* Serial no. and consecutive no. only appear when use of date/time is deactivated in the menu Setup - Tool
Properties - Use date.
►
A software program is offered for evaluating the log files.
(See www.contipressurecheck.com/hht).
Handling the tool
In order to communicate with the tire sensors, the Hand-Held Tool is equipped with an
antenna. The following describes the procedure for communication that is used in all
menus.
►
Always hold the antenna in the direction of the sensor in order to en-
sure the best possible communication.
►
If sound and/or vibration was switched on during setup, a correspond-
ing signal is emitted after successful communication.
►
The communication with the sensor takes place via 3 steps with in-
creasing transmission power. If communication beyond that is still not
possible, the process is aborted.
Hand-Held Tool
File name?
Date Time
(Consecutive
(Serial no.)
*
no.)
*
YYYYMMDD hhmmss
(XXXXXX) (ZZZZ)
*
Code letter for the
subfunction in
installation
(Optional)
IN =
Installation
MP =
Modify Parameter
MS =
Modify Sensor Ids
SU =
*
Software Update
83