Cleaning & Maintenance; Important - NuWave Brio 14Q Manual Del Propietário

INSTRUCTIONS
Probe Temp Guide
Temp. Rare
°F °F
Chicken Breast 360
Steak 1" thick 350 125
Burgers ¼ lb
350
Pork Chops ¾" thick
360
Fish Fillets ½" thick
350
Fish Steaks 1" thick 350
Shrimp 350
Sausage 360
Vegetables (firm) 360
Vegetables (soft) 350
NOTE: Times may vary depending on cooking preference.
Measurement Chart
Teaspoon = t Fahrenheit = °F
Tablespoon = T Celsius = °C
Cup = c Fluid Ounces = fl oz
Ounce = oz Liter = L
Pound = lb(s) Milliliter = ml
Quart = qt Package = pkg.
Pint = pt Gallon = gal
26 26
instructions
Medium Medium Medium Well Time
Rare °F °F Well °F °F Min.
165 5 - 8
135 145 150 160 3 - 8
5 - 7
145 150 160 5 - 7
145 150 160 2 - 3
5 - 7
3 - 4
160 4 - 5
4 - 8
2 - 5
Minute = min
Second = sec
Inch = in.
Dozen = doz
Hour = hr
Gram = g
CLEANING & MAINTENANCE
Cleaning
Clean your Brio after every use or in between a number of large
batches. Do not use metal utensils or harsh abrasives when cleaning
as this can damage the coating.
1. Unplug the Brio and make sure it cools completely.
2. Use a damp cloth to wipe the outside of the appliance.
3. Clean the Mesh Tray, Mesh Racks, Drip Tray, Rotisserie Basket,
and Rotisserie Skewer with a nonabrasive sponge, hot water,
and mild detergent. Dry thoroughly.
4. To clean Probe, wipe end with a damp cloth or paper towel.
Note: Remove the Trays, Racks, Basket, and Probe. Place on a heat-
resistant surface to help cool the appliance quicker.
Note: If using the dishwasher for the Mesh Tray, Mesh Racks, Drip
Tray, Rotisserie Basket, or Rotisserie Skewer, it is recommended to
use top rack only. Hand-wash Probe.
Tip: If there is residual food in the Tray or Racks, add some hot water
and let it soak separately for about 10 minutes for easier cleaning.
Then, use a soft cleaning brush to remove any lingering food. Dry
parts thoroughly.
Storage:
1. Unplug the Brio and let it cool down completely.
2. Make sure that all the parts are clean and dry.
3. Store in a cool dry place.
IMPORTANT - Do not immerse unit and
door in water or attempt to cycle through
dishwasher. The outer surface may be
cleaned by wiping carefully with a damp
dishcloth or sponge. Make sure unit has
cooled completely prior to cleaning.
Light Bulb Replacement
To replace bulb, turn off and unplug
Brio. Ensure unit, bulb cover, and the bulb have cooled completely.
Unscrew light bulb cover and light bulb. Replace bulb and cover
before plugging back in and turning on.
Note: Before removing bulb cover and bulb, allow unit, including parts
and insides, to cool completely.
27 27
nuwavenow.com nuwavenow.com