Uline H-10066 Manual De Instrucciones página 3

• Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the stapler. Keep
the cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
• Using an extension cord suitable for outdoor
operation reduces the risk of electric shock.
• If operating in a damp location is unavoidable,
use a residual current device (RCD). Use of an
RCD reduces the risk of electric shock.
• Stay alert and use common sense when
operating a power tool. Do not use a power
tool while tired or under the influence of drugs,
alcohol or medication. A moment of inattention
while operating stapler may result in serious
personal injury.
• Use personal protective equipment. Always
wear eye protection. Protective equipment
such as dust masks, non-skid safety shoes, hard
hat or hearing protection used for appropriate
conditions will reduce personal injuries.
• Prevent unintentional starting. Ensure the switch
is in the off position before connecting to the
battery pack, picking up or carrying the tool.
Carrying power tools with a finger on the switch
or energizing power tools that have the switch on
invites accidents.
• Remove any adjusting key or wrench before
turning on the power tool. A wrench or key left
attached to a rotating part of the unit may result
in personal injury.
• Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
• Do not wear loose clothing or jewelry. Keep
hair, clothing and gloves away from moving
parts. Loose clothes, jewelry or long hair can be
caught in moving parts.
• If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
• Do not force the stapler. Use only on corrugate.
• Do not use the stapler if the switch does not turn
it on and off. If stapler cannot be controlled with
the switch, it is dangerous and must be repaired.
PAGE 3 OF 42
SAFETY CONTINUED
• Disconnect battery pack from the stapler
before making any adjustments, changing
accessories or storing. Such preventive safety
measures reduce the risk of starting the stapler
accidentally.
• Store idle stapler out of reach of children. Do not
allow persons unfamiliar with the stapler or these
instructions to operate. Stapler is dangerous in
the hands of untrained users.
• Maintain stapler. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect operation
of the stapler. If damaged, have the stapler
repaired before use. Many accidents are caused
by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
• Use the stapler and accessories in accordance
with these instructions, taking into account
the working conditions and the work to be
performed. Use of the stapler for operations
different from those intended could result in a
hazardous situation.
• Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one
type of battery pack may create a risk of fire
when used with another battery pack.
• Use stapler only with specifically designated
battery packs. Use of any other battery packs
may create a risk of injury and/or fire.
• When the battery pack is not in use, keep it away
from other metal objects like paper clips, coins,
keys, nails, screws or other small metal objects
that can make a connection from one terminal
to another. Shorting the battery terminals
together may cause burns or a fire.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, seek medical help. Liquid ejected
from the battery may cause irritation or burns.
1022 IH-10066