Technical Data - Uline H-10066 Manual De Instrucciones

OPERATING ISSUE
Several staples are set
at once.
Staple penetrates
only through upper
corrugate.
Loose staple clinch.
If the troubleshooting section does not resolve your problem, contact Uline Customer Service at 1-800-295-5510.
STAPLER
Operation modes
Weight (including battery)
Dimensions (L x W x H)
Staple cycle speed
Magazine capacity
Typical measured A-rated emission sound pressure level
– EN 60745-1/2:2009 Average sound power level
– EN 60745-1/2:2009 Deviation K
Vibrations on handle – EN 60745-1/2:2009
Operating temperature (See also operating instructions for
battery and charger on page 7)
Maximum allowable relative humidity
STAPLES
Length
Width
BATTERY/CHARGER
Charger type
Rated voltage charger
Battery
Charging time (80-100%)
Shots per battery charge
PAGE 13 OF 42
TROUBLESHOOTING CONTINUED
CAUSES
Magazine not mounted correctly.
Wrong penetration setting (too low).
Staples too short.
Carton too thick.
Clinch setting too loose.

TECHNICAL DATA

1-800-295-5510
Re-install magazine; see page 10.
Adjust penetration depth; see page 9.
Replace with longer staples.
Use other carton thickness.
Adjust staple clinch (tighten); see page 9.
Manual/Semi-Automatic/Automatic
5/8-3/4" (JK561-15/18) / 7/8" (JK561-22)
US: Bosch BC330 (Bosch GAL 1230 CV)
Bosch Li-Ion 12 V, 4.0 Ah
US: Approx. 120-160 min. (Approx. 60-80 min.)
uline.com
RECOMMENDATIONS
SPECIFICATION
6 lbs.
16.1 x 4.3 x 8.1"
200 ms
150 pcs.
L 77 dB (A)
PA
L 85 dB (A)
WA
K 2.5 dB
WA
a < 2.5 m/s
2
h
14-104°F
Up to 90%
SPECIFICATION
1⁄"
SPECIFICATION
US: 115 V (230 V)
Up to 6,000
1022 IH-10066