Uline H-1993 Manual De Instrucciones

H-1993
KIHLBERG MANUAL
CARTON STAPLER
TOOL NEEDED
Allen Wrench
(Included)
ADJUSTING THE STAPLE LEG LENGTH
The stapler is adjustable for 5/8"-3/4" staples. The stapler
setting for a different staple leg length is altered as
follows. Start by adjusting the depth of stapling for deep
clinching (=). (See Figure 2)
1. With the allen wrench,
unscrew locking screw (A)
two turns. (See Figure 1)
2. With a screwdriver, adjust
screw (B) to 5/8" or 3/4" leg
length. (See Figure 1)
3. Tighten the locking
screw (A). (See Figure 1)
ADJUSTING THE PENETRATION DEPTH
The depth of stapling is easily
adjusted by using the setting
knob (1). Press the knob in and
turn it to the desired position.
(See Figure 2)
• Use "–" for shallow stapling
penetration.
• Use "=" for deep stapling
penetration.
PAGE 1 OF 9
1-800-295-5510
uline.com
COMPATIBLE STAPLES
S-10720 S-10721
C58 C34
1⁄ x 5/8" 1⁄ x 3/4"
LOADING
Figure 1
B
A
3/4" 5/8"
Figure 2
1
Pour le français, consulter les pages 7-9.
ADJUSTING STAPLE CLINCH
It is possible to adjust how tightly the staples are closing:
1. With the allen wrench,
turn the adjusting screw
clockwise for a stronger
clinch. (See Figure 3)
2. Turn the adjusting screw
counterclockwise to open
the clinch more.
CONTROLLING THE CLINCH
(See Figure 4)
a. Good clinch.
a. Leg length of the
staple too long or
bent too much.
b. Leg length of staple
too short or not bent
enough.
If necessary, adjust
staple clinch.
Para Español, vea páginas 4-6.
Figure 3
Adjusting
Screw
Figure 4
A
B
C
0421 IH-1993