Tabla de contenido
Device Availability
When setting up a group or managing devices, it is important to understand the difference between open and associated devi
ces.
Open Device
Associated Device
A device can be unassociated by selecting 'none' in the group row drop-down to clear it from the group. The device is then
open and available for association to another group.
Tip: Performing a factory reset will default the device to open.
Configuración de grupos automáticos
Se puede asociar un grupo de MXW sin usar el programa de control cuando una red está compuesta de solo un transceptor
de punto de acceso (APT), una estación de carga en red (NCS) y una interfaz de red de audio (ANI). Para los mejores resulta
dos, lleve a cabo una restauración a valores predeterminados en fábrica para eliminar las asociaciones a grupos existentes.
1.
Conecte un APT, una NCS y una ANI a la red. La red debe contener solo uno de cada dispositivo.
2.
Efectúe una restauración a valores de fábrica en los dispositivos (consulte la sección Configuración de fábrica).
A device that is not associated to a group is considered 'open.' Open devices are available
for association by selecting the drop-down window in a Group row. The device will show
Open in the Group column of the Utility page.
A device is considered 'associated' once it has been selected in a group row. Each device
can only belong to one group at a time (and therefore one Configuration). Once a device has
been associated to a group, it is managed on the Configuration tab can be viewed in detail
on the Utility tab. The device will show its group number in the Group column of the Utility
page.
Device Availability
Shure Incorporated
44/104
Tabla de contenido
