EUFY RoboVac L35 Hybrid+ Manual Del Usuario página 15

3
Wet the mopping cloth and wring it until it does not drip, then attach the cloth to
the mopping module.
4
Remove the water tank.
5 Open the water inlet cover to fill with water, then close the cover.
Do not use any cleaning solution, as your floor may become slippery and
therefore affect the cleaning effect.
26 EN
6
Install the water tank and the mopping module under RoboVac with a click.
The mopping mode is only intended for a clean floor without stubborn
stains. To achieve a better mopping effect, it is recommended to clean the
floor with RoboVac three times before mopping.
7
Start cleaning. RoboVac will automatically vacuum and mop.
8
When RoboVac finishes cleaning, remove the mopping module.
9
Remove the dust box and the water tank.
Clean the dust box and water tank, empty any remaining water, and clean the
mopping cloth to prevent mildew or unpleasant smells. For how to clean and
maintain the components, refer to the "Cleaning and Maintenance" section in this
manual.
EN 27