Settings Menus - RS Pro RS-9889 Manual De Instrucciones

True RMS Thermal MultiMeter / English

6.Settings Menus

6.1.Using Settings Menus
• Press MENU button to open the Settings Menus, as show below.
• Press UP/DOWN button to select menu item or change the value of current focus item.
• Press RIGHT/MENU button to enter the submenu or set focus on the current sellected item.
Press LEFT button to return to the previous menu.
• If want to exit settings menus, can press MODE/RANGE/HOLD/IR button or press LEFT button in root menu.
6.2.Settings details
• Palette mode
Thermal imager has five kinds of palette, such as:
Press RIGHT/MENU button to select one of the display color palettes.
6.3.Temp Unit
Press RIGHT/MENU button to set focus on this option and the color of option value will change to black
. Infocus state, use the RIGHT/MENU button to toggle
to exit focus state and the color of option value will change white
6.4.Measure
Press RIGHT/MENU button to enter measure menu.
Two selections are available: HOT POINT and COLD POINT. Press
RIGHT/MENU button to set cur select item on or off.
• Hot point: This option enables thermal imager automatically detect
the highest temperature point.
• Cold point: This option enables thermal imager automatically detect
the lowest temperature point.
18
o o
C, F and K, use LEFT/RIGHT/MENU button
.
19/07/2018 Version No. 001
6.5.Emissivity
• Press RIGHT/MENU button to set focus on this option. In focus state, use UP /DOWN button to
increase or decrease emissivity's value, use LEFT/RIGHT/MENU button to exit focus state. The available
range is 0.01 to 0.99 in 0.01 steps.
6.6.Language
• Press RIGHT/MENU button to to enter language menu.
Three options are available: Simplified Chinese, Traditional Chinese and
English.
Use UP/DOWN button to select language and use RIGHT/MENU button
to set selected language to be valid.
6.7.Setup
Press RIGHT/MENU button to enter Setup menu.
Five options are available: Beep, Bluetooth, Laser, Brightness and Auto Off.
• Beep:Use RIGHT/MENU button to set beep on or off.
• Bluetooth: Use RIGHT/MENU button to set bluetooth power on or off.
• Laser: Use RIGHT/MENU button to set laser pointer on or off.
• Brightness: Press RIGHT/MENU button to set focus on this option.
In focus state, use UP/DOWN button to change LCD's brightness,
use LEFT/RIGHT/MENU button to exit focus state. The available
brightness's range is 100% to 10% in 10% steps.
• Auto Off: Press RIGHT/MENU button to set focus on this option.
In focus state, use UP/DOWN button to choose the time period after
which the meter enters the sleep mode.
6.8.Bluetooth Connect
1.Turn on the Bluetooth function on the instrument.
19/07/2018 Version No. 001
True RMS Thermal MultiMeter / English
19