Using The 3Dyc And I-P Mode; Comparing Picture Adjustments On The Screen - Pioneer KRP-500A Manual De Instrucciones

Setting up
Field NR
Removes glimmer for more natural images
Selections Off Deactivates Field NR
High Enhanced Field NR
Mid Standard Field NR
Low Moderate Field NR
Block NR
Reduces noise such as blocks appearing in digitally compressed sources on
DVD and in digital broadcasting
Selections Off Deactivates Block NR
On Activates Block NR
Mosquito NR
Reduces noise in contoured portions appearing in digitally compressed sources
on DVD and in digital broadcasting
Selections Off Deactivates Mosquito NR
On Activates Mosquito NR
7 Press HOME MENU to exit the menu.

Using the 3DYC and I-P Mode

1 Press HOME MENU.
2 Select "Picture" (/ then ENTER).
3 Select "Pro Adjust" (/ then ENTER).
4 Select "Others" (/ then ENTER).
5 Select "3DYC" or "I-P Mode" (/ then ENTER).
6 Select the desired parameter (/ then ENTER).
3DYC
Optimizes characteristics for separating brightness signals and color signals.
This works for both video and still images.
Selections Off Deactivates 3DYC
High Enhanced 3DYC
Mid Standard 3DYC
Low Moderate 3DYC
Note
• For the 3DYC, the individual parameters are selected only
when:
– You have selected "INPUT 1", "INPUT 2", "INPUT 3" or "INPUT
6" as the input source and there is a video signal present.
– You have selected the analog tuner.
• The 3DYC setting is ineffective when SECAM, PAL-M, PAL-N or
4.43 NTSC signals are input.
All manuals and user guides at all-guides.com
I-P Mode
Performs optimum conversion from interlace signals to progressive signals.
This works for both video and still images.
Selections
7
Comparing picture adjustments on the
screen
During picture adjustments, you can quickly refer to the image
previously set in the same parameter, allowing you to easily
compare and select the preferred image quality.
1
2
3
4
control unit.
"Before" displays and the image adjusted last time appears for
comparison.
5
image.
Each press of the button toggles between "Before" and "After".
6
7
1 Primarily for images with fast motion
2 Well balanced setting for both moving and
still images
3 Primarily for images with little or no motion
Note
• The I-P Mode setting is disabled if you use an external input
source and select "On" for "Game Control Pref" on the "Option"
menu.
• For the I-P Mode, the individual parameters are not selectable
for the following input signals: 480p, 576p, 720p, 1080p.
Press HOME MENU to exit the menu.
Press HOME MENU.
Select "Picture" (/ then ENTER).
Select an item to be adjusted (/ then ENTER).
While performing adjustment, press BLUE on the remote
Before
Press the button again to return to the newly adjusted
Repeat steps 1 and 5 for other parameters.
Press HOME MENU to exit the menu.
Caution
• If you exit the menu by pressing HOME MENU or no operation
is performed for 60 seconds, all the parameter settings
displayed last are stored in memory.
• If you want to exit the menu without performing the
adjustments (or leaving the settings disabled) on the "After"
screen, switch to "Before" and then exit.
Note
• You cannot adjust any item while on the "Before" screen. A
warning message appears.
• When you switch to another parameter, make sure to change
the display from "Before" to "After" first, otherwise you cannot
select "Before". A warning message appears if you don't.
• If you exit the selection from the "Before" screen, the previous
entry is stored in the memory and the BLUE button no longer
works.
08
35
En