Blow Out The Nozzle; Work Breaks; Shutting Down, Maintenance And Cleaning - Parkside PAFS 550 A1 Traducción Del Manual De Instrucciones Original

Blow out the nozzle

WARNING!
► Always secure the paint spray gun 7 while
you are not actually spraying.
♦ Turn the inserted nozzle 5 180 degrees towards
the rear (see fig. D). If the nozzle cannot be
turned, try depressurising the appliance.
♦ Press the trigger 9 to blow out the nozzle 5.
Hold the paint spray gun 7 over an empty
container while doing so. As soon as a
straight spray jet comes out, the nozzle 5 is
blown out.
♦ Turn the inserted nozzle 5 180 degrees back
towards the front.
NOTE
► Use an appropriate HEA filter q to minimise
blockages.

Work breaks

♦ Depressurise the appliance.
♦ Turn the pressure regulator dial 3 to position
0 (off).
♦ Remove the plug from the mains socket.
♦ Place the paint spray gun 7 in a plastic bag,
which you then seal airtight.
♦ Wet the paint in the paint bucket with water so
that no skin forms on the top.
■ 72 │ GB │ MT
Shutting down, maintenance
and cleaning
CAUTION!
► Do not use flammable materials such as nitro
thinners for cleaning.
► Please refer to the manufacturer's information
of the respective spray material to find out
which cleaning agents are suitable.
NOTE
► Thorough cleaning directly after every use is
very important for safety and operation.
Otherwise, the proper functioning of the
appliance can no longer be guaranteed.
► Wear suitable protective gloves during
cleaning work.
► Remove coating material residues at appro-
priate intervals. Remove any sprayed material
that has got onto unwanted surfaces before it
dries.
♦ Depressurise the appliance.
♦ Lock the paint spray gun 7 by turning the safety
catch 6 with the tip as far back and up as
possible.
♦ Unscrew the nozzle holder a from the paint
spray gun 7.
♦ Place the suction hose 2 together with the
return hose 1 in a container with warm water
and some mild detergent.
♦ Turn the function switch to the horizontal posi-
tion (SPRAY).
♦ Turn the pressure regulator dial 3 to position 5.
♦ Unlock the paint spray gun 7 by turning the
safety catch 6 so that its tip is facing down.
♦ Drain off the remaining paint by pulling the
trigger 9. Hold the paint spray gun 7 over
a paint bucket while doing so.
CAUTION!
► If you are using a metal container, earth the
paint spray gun 7 beforehand.
PAFS 550 A1