Special Safety Instructions - Scheppach HMS1070 Traducción De Las Instrucciones Originales

Ocultar thumbs Ver también para HMS1070:

Tabla de contenido

Idiomas disponibles

Use the right tool

- Do not force small tools to do the job of a

heavy duty tool.

- Do not use tools for purposes not intended;

or example do not use circular saws to cut

tree limbs or logs.

Dress properly

- Do not wear loose clothing or jewellery, they

can be caught in moving parts.

- Non-skid footwear is recommended when

working outdoors.

- Wear protective hair covering to contain long

hair.

Use protective equipment

- Use safety glasses.

- Use face or dust mask if working operations

create dust.

10 Connect dust extraction equipment

- lf the tool is provided for the connection of

dust extraction and collecting equipment, en-

sure these are connected and properly used.

11 Do not abuse the cord

- Never yank the cord to disconnect it from the

socket. Keep the cord away from heat, oil and

sharp edges.

12 Secure work

- Where possible use clamps or a vice to hold

the work. lt is safer than using your hand.

13 Do not overreach

- Keep proper footing and balance at all times.

14 Maintain tools with care

- Keep cutting tools sharp and clean for better

and safer performance.

- Follow instruction for lubricating and chang-

ing accessories.

- lnspect tool cords periodically and if damaged

have them repaired by an authorized service

facility.

- lnspect extension cords periodically and re-

place if damaged.

- Keep handles dry, clean and free from oil and

grease.

15 Disconnect tools

- When not in use, before servicing and when

changing accessories such as blades, bits

and cutters, disconnect tools from the power

supply. If the planer shaft blocked when work-

ing by excessive feed force or clamping the

work piece, turn off the device and disconnect

it from the mains plug. Remove the workpiece

and make sure that the planer shaft runs free-

ly. Turn the power on, and run the operation

again with reduced feed force.

16 Remove adjusting keys and wrenches

- Form the habit of checking to see that keys

and adjusting wrenches are removed from the

tool before turning it on.

17 Avoid unintentional starting

- Ensure switch is in "off' position when plug-

ging in.

18 Use outdoor extension leads

- When the tool is used outdoors, use only ex-

tension cords intended for outdoor use and

so marked.

19 Stay alert

- Watch what you are doing, use common

sense and do not operate the tool when you

are tired.

20 Check damaged parts

- Before further use of tool, it should be care-

fully checked to determine that it will operate

properly and perform its intended function.

- Check for alignment of moving parts, binding

of moving parts, breakage of parts, mounting

and any other conditions that may affect its

operation.

- A guard or other part that is damaged should

be properly repaired or replaced by an author-

ized service centre unless otherwise indicat-

ed in this instruction manual.

- Have defective switches replaced by an au-

thorized service centre.

- Do not use the tool if the switch does not turn

it on and off.

21 WARNING!

- The use of any accessory or attachment oth-

er than one recommended in this instruction

manual may present a risk of personal injury.

22 Have your tool repaired by a qualified person

- This electric tool complies with the relevant

safety rules. Repairs should only be carried

out by qualified persons using original spare

parts, otherwise this may result in considera-

ble danger to the user.

This appliance is not intended for use by persons

(including children) with reduced physical, senso-

ry or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision

or instruction concerning use of the appliance by a

person responsible for their safety.

Children should be supervised to ensure that they do

not play with the appliance.