Bosch 0 275 U07 3SC Instrucciones De Servicio Originales página 332

English – 10
Level Notes
ECO Effective support with maximum effi-
ciency, for maximum range
Steady support, long range for touring
TOUR
TOUR+ Dynamic support for normal riding and
biking sports
eMTB/ Optimal support whatever the terrain,
rapid acceleration when starting from a
SPORT
standstill, improved dynamics and top
performance
TURBO Maximum support even at a high cadence,
for sport cycling
AUTO The assistance is adapted dynamically to
the riding situation.
RACE Maximum support on the eMTB race
course; very direct response behavior and
maximum "Extended Boost" for the best
possible performance in competitive situ-
ations
A)
CARGO Steady, powerful support, to be able to
transport heavy weights
A) The CARGO assistance level may also have a different des-
ignation.
The designations and configuration of the assistance levels can
be preconfigured by the manufacturer and selected by the bicy-
cle retailer.
Adjusting the assistance level
The assistance levels can be adjusted within certain
parameters using the eBike Flow app. You therefore
have the option of adjusting your eBike to your per-
sonal requirements.
Creating a mode that is totally your own is not possi-
ble. You can only adjust the modes that have been en-
abled on your system by the manufacturer or the
dealer. This may even be less than 4 modes.
Due to technical limitations, you cannot adjust the
eMTB and TOUR+ modes. It may also be the case
that a mode cannot be adjusted due to restrictions in
your country.
The following parameters are available to you for ad-
justment:
0 275 U07 3RL | (09.03.2022)
– Support in relation to the basic value of the mode
(within the legal specifications)
– Response behavior of the drive
– Throttling down speed (within the legal specifica-
tions)
– Maximum torque (within the framework of the drive
limits)
Note: Please ensure that your changed mode retains
the position, name and color on all on-board comput-
ers and operating elements.
Interaction between the eBike system and
gear-shifting
The gear shifting should be used with an eBike drive
in the same way as with a normal bicycle (observe the
operating instructions of your eBike on this point).
Irrespective of the type of gear shifting, it is advisable
that you briefly reduce the pressure on the pedals
when changing gear. This will aid gear shifting and re-
duce wear on the powertrain.
By selecting the correct gear, you can increase your
speed and range while applying the same amount of
force.
Switching bike lights on/off
Before starting each journey, check that your bike
lights are working correctly.
To switch on the bike lights, press the (9) button for
more than 1 s.
You can use the (11) and (10) buttons to control the
brightness of the LEDs on the control unit.
Switching the push assistance on/off
The push assistance aids you when pushing your
eBike. The speed of this function depends on the se-
lected gear and can reach a maximum of 2.5 mph.
The push assistance function must only be used
u
when pushing the eBike. There is a risk of injury if
the wheels of the eBike are not in contact with the
ground while using the push assistance.
To start walk assistance, press the (8) button for
more than 1 s and keep it pressed. The battery
Bosch eBike Systems